ConnectX-2 WOL

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
R

roberth58

New Member
Nov 5, 2014
22
5
3
61
Florida
I am trying to find out if the MNPA19-XTR supports WOL. According to Mellanox firmware pdf's they do but I am unable to change support to "g" only shows "d". I have mellanox branded with firmware 2.9.1200 and HP cards at 2.9.1000. Tried from windows and linux. Can anyone give me a straight answer, can't get one from Mellanox. If the intel or chelsio cards support WOL I could swap them.

thanks
 
P

Pete L.

Member
Nov 8, 2015
133
23
18
56
Beantown, MA
This is a good question, even on the Mellanox Website there seems to be issues with getting it to work. My question is that in my systems when I turn the system off both my ConnectX2 and X3 cards turn off as well. I don't know how you can WOL them if they aren't powered on / listening for traffic.

Maybe there is some kind of BIOS Setting that would assist in that? Keep the card slot powered so that it would work?
 
You must log in or register to reply here.
Top Bottom