Hi, I am experimenting with self hosting and creating a NAS storage and Nextcloud running on Proxmox Server. I am just struggling to get the hard drive setup concept. I read the article
https://www.servethehome.com/the-proxmox-ve-kvm-based-all-in-one-freenas/
but still not clear on the FreeNAS ZFS Storage (pass through).
(Attached is a pdf of screen shots of my proxmox if that helps)
So I have two SSD's which hosts Promox OS in a mirror
Then three drives setup as RAIDZ-0 which hosts the VMS (FreeNAS)
Now the other single drive which will be for the FreeNAS to host the storage is not clear to me how I set that up in Proxmox to be seen by the Free NAS VM.
Cheers
https://www.servethehome.com/the-proxmox-ve-kvm-based-all-in-one-freenas/
but still not clear on the FreeNAS ZFS Storage (pass through).
(Attached is a pdf of screen shots of my proxmox if that helps)
So I have two SSD's which hosts Promox OS in a mirror
Then three drives setup as RAIDZ-0 which hosts the VMS (FreeNAS)
Now the other single drive which will be for the FreeNAS to host the storage is not clear to me how I set that up in Proxmox to be seen by the Free NAS VM.
- Do I create a ZFS storage pool in Promox then allocated disk space to the FreeNAS
- Do I leave them as is and go in and configure them directly in nano /etc/pve/nodes/fmt-pve-03/qemu-server/xyz.conf
Cheers
Attachments
-
147.8 KB Views: 5