AU Cisco C220 M3 SFF, 2 x E5-2697 V2, 256GB RAM, VIC1225, 9271CV-8i...etc

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

DRAGONKZ

Member
Apr 9, 2018
87
10
8
41
Hi,

Just seeing if anyone would be interested in my 2 x Cisco C220 M3 SFF Servers.

They are both specced the same (I bought low end models and specced them to almost max configs, including sourcing all the impossible to find bits like the TPMs and SAS/RAID modules!).

The only upgrades you can possibly do for these are to swap the 16GB DIMMS to 32GB LR DIMMS, and swap the 10Gb VIC1225 to a 40Gb VIC1285 :)

Spec wise, each one has:

Cisco C220 M3 SFF (8 x 2.5" bay) Chassis
2 x 650 Watt Power Supplies
V1 motherboards
Cisco v1.2 TPM
Cisco SAS ROM (Used with on-board RAID, disabled when 9271 RAID controller installed)
Cisco RAID5 ROM (Used with on-board RAID, disabled when 9271 RAID controller installed)
2 x 32GB Samsung Extreme SD cards
2 x Intel E5-2697 V2 CPUs
256GB (16 x 16GB) Cisco branded Samsung DDR3 ECC 1866Mhz RAM
Dual port 1Gb Intel LOM NIC
UCS-9271CV-8i RAID controller with 1GB Cache and SuperCap
VIC1225 Dual Port 10Gb CNA/NIC (Used with Fabric Interconnect, or stand alone mode)
No drives, but have several drives for sale separately (Happy to include some empty caddies or blank caddies)

Each also comes with a set of original Cisco Rails, and a brand new original cable management arm

Both servers are running the latest firmware for all components, and have no issues.

Servers are located in Sydney AUS.

Price wise I'd ideally be after $2200 AUD each.

I also have several 400GB Cisco SAS3 SSDs, and 1.2TB Cisco 10K SAS HDDs if anyone would need drives.

Thanks!