Hi everyone, I've got a used Intel S2600CP2j board that came out of a 1u server with a ton of fans. I'm putting it in a case that will have just two sys fans running and of course the CPU fans... The BIOS is indeed up to date already. How do I go about getting into the FRU/SDR set up to choose which fans I actually have installed? My understanding is that if it's looking for like 5 fans and I only have 2, it'll run everything at 100% (including the CPU fan) to compensate so I need to change this so it'll modulate based on cpu temp etc.
Do I need to reset the BIOS before or after doing any kind of change like this?
I have the computer partially built on my desk with no fans other than cpu fan attached and running. The computer posts no problem it's just that the CPU fan is going full blast when CPU temp is like 25 degrees C.
I'm new to server gear and would really appreciate any help.
Do I need to reset the BIOS before or after doing any kind of change like this?
I have the computer partially built on my desk with no fans other than cpu fan attached and running. The computer posts no problem it's just that the CPU fan is going full blast when CPU temp is like 25 degrees C.
I'm new to server gear and would really appreciate any help.
Last edited: