Case for Intel W2600CR2 ?

[marv]

I bought Intel W2600CR2 not checking its dimensions prior and expecting EATX. But this 14.2" x 15" monster broke my plan to place it in old Chieftec BH case which i have bunch of them lying around.

So, could anyone confirm if Fractal Design Define XL or Arc XL will fit? It claims to support XL-ATX which I found on wikipedia are 13.6" high (really close to 14.2 )

 

[marv]

I will answer my own question

It fits ARC XL R2, but 5,25" cage has to be removed (board is too wide). Only two mount holes fit, rest has to be drilled and plate extension has to be implemented to mount last column of holes.

 

[orson]

Hi.

Quick question about that board: does it use standard ATX power supply ?? I found some pictures on line and i can see 1 x 24 pin, 2 x 8 pin and 1 x 4 pins (I assume for sas controller?)

Thanks and have a nice day.

 

[marv]

I am using EVGA 750 G2, it runs fine. the 4PIN is actually 12V output supposed to be connected to PCIe card in case you have some that needs it (manual page 107).