SSH@sw1(config)#sh sflow
sFlow version: 5
sFlow services are enabled.
sFlow agent IPv6 address: fc00::1337:2
sFlow source IP address: 10.10.100.2
sFlow source IPv6 address: fc00::1337:2
2 collector destinations configured:
Collector IP 10.10.100.25, UDP 6343, Configured VRF: None, Using VRF: default-vrf
Collector IPv6 fc00::1337:25, UDP 56343, Configured VRF: None, Using VRF: default-vrf
UDP source port: 8888 (Default)
Polling interval is 4294967295 seconds.
Configured default sampling rate: 1 per 32 packets.
Actual default sampling rate: 1 per 32 packets.
The maximum sFlow sample size: 128.
Sample mode: Non-dropped packets
sFlow exporting cpu-traffic is disabled.
627220 UDP packets exported
595014 sFlow flow samples collected.
sFlow ports: ethe 1/1/1 to 1/1/2 ethe 1/2/1
Module Sampling Rates
---------------------
U1:M1 configured rate=32, actual rate=32
U1:M2 configured rate=32, actual rate=32
Port Sampling Rates
-------------------
Port=1/1/1, configured rate=32, actual rate=32
Port=1/1/2, configured rate=32, actual rate=32
Port=1/2/1, configured rate=32, actual rate=32