To stop the fan speed fluctuating if you use the Noctua PWMs, search and replace the following hex values in tc, hwd and health files which can be found under opt/tms
tc:
00 01 00 00 00 00 00 04 00 00 00 04 00 00 00 04 00 04 00 01 00 05 28 00 00 0A 28 00 00 00 00 63 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
->
00 01 00 00 00 00 00 04 00 00 00 04 00 00 00 04 00 04 00 01 00 0A 50 00 00 0A 50 00 00 00 00 63 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
hwd + health (you may as well patch all the files in the opt/tms tree though)
01 08 1E 00 00 00 00 00 08 00 00 46 50 00 00 00 00 00 00 32 C8 00 00 00 69 00 00 00 64 00 00 00 50 00 00 00 46 00 00 00 1F 00 00 00 01 00 00 00 01
->
01 50 1E 00 00 00 00 00 50 00 00 13 88 00 00 00 00 00 00 13 88 00 00 00 69 00 00 00 64 00 00 00 50 00 00 00 46 00 00 00 1F 00 00 00 01 00 00 00 01
These mods reduce the max fan speed to 5k RPM and the default speed to 4K RPM
still can't find those vaules in the tc hwd and health file, did you do it on version 3.6.1002?
in tc , only silimar hex value is
000100000000000400000004000000040004000100050028000A0028000000630055FFFF0037FFFF000000000003000000000000
but your hex value is
000100000000000400000004000000040004000100052800000A280000000063000000000003000000000000000000000000000000000000
how to mod custom RPM like max 9k default 5k or max 6k default 5k ?