I used these modules without any problems. If I remember correctly code 29 means memory channel training and first time you using this DIMM in the specific slot it does training and it takes a lot of time (couple of minutes in my case).
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Its not that i dont think just left it there for 10 minutes, guess ill try every slot since i got nothing better to do lol
got my new ram can now oot to bios, im on 1401 for the ace it seems theyve removed xmp profiles then Ai Overclock Tuner is missing from the menu
also something strange i found, it fails to post with radeon hd3650, i tried all slots the gpu is good as i was using it in another machine, have thrown my titan x in there until i can get my rx 6950xt from my main machine
also something strange i found, it fails to post with radeon hd3650, i tried all slots the gpu is good as i was using it in another machine, have thrown my titan x in there until i can get my rx 6950xt from my main machine
Last edited:
ignore fake value. written by BIOS but has no effect because clock bins never reach it.
im getting like 10k less score than other benchmarks ive seen here is it the ram do you think?
i have same experience with Windows 11. you need to tweak.
Win 11 iot enterprise 24h2 ? serious ?
Last edited:
Kingston FURY™ Renegade Pro DDR5 RDIMM Memory - Kingston Technology
Kingston FURY™ Renegade Pro DDR5 RDIMM offers speeds of 4800MT/s – 6800MT/s and kit capacities of up to 256GB. DDR5 features on-die ECC (ODECC) for improved stability at extreme speeds and dual 32-bit subchannels for increased efficiency.
they sell a bunch of different speeds of the ram you think its safe to oc using the timings they mention on the others?
regarding water cooling my temps weren't going high at all on those runs so should be fine with air ive got a noctua u14s
yeah iot enterprise is good its the version of win11 with the least bloat/tracking, only temporary anyway ill move over to arch linux after im done messing with things
ill check the windows performance setting i didn't touch it
no but you have no other choice, ACE = 4 mem. channels. SAGE = 8 mem. channels.
but it is a cheap ES, if you run a $8000usd prod.unit the money loss / risk will be higher.
Have you disabled C6 wait state? This CPU has bug that unless you disable C6 will make Windows to hang on startup.
Well, if one CPU has a problem and another does not it is an indicator that one of them has a bug
But I turn off C6 on all W790 motherboards no matter what CPU I’m using.??? no SPR-SP D0 freeze on C741 but on W790.Well, if one CPU has a problem and another does not it is an indicator that one of them has a bug
W790 BIOS has a bug ( or just don't support SP models )