ASRock Rack IPMI: How to disable alarms for a certain sensor?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

gsrcrxsi

Active Member
Dec 12, 2018
293
96
28
So i just setup a system with an ASRock Rack EPYCD8 motherboard.

I was messing around with where some fans were plugged into the motherboard, and after unplugging a fan and moving it to a different header, now i have a blinking red light on the motherboard where the fan was, and the IPMI reports a critical alarm for that fan.

But i see no way to disable this alert of this sensor. I can see a list of disabled sensors in IPMI, but no way to add to this list? I thought rebooting the system would help, but the alarm is still there.

how do I get rid of this alert?
 

EffrafaxOfWug

Radioactive Member
Feb 12, 2015
1,394
511
113
If you restart the IPMI interface the alarm should go away. If you're using ipmitool you can run this:
Code:
ipmitool mc reset warm