It would help if you post your run config.
What is the show command?
My configuration is pretty simple, and note that I'm not doing routing on the switch.
VLAN 1 is .15/24 subnet, normal home network
VLAN 98 is .98/24, IOT
VLAN 99 is .99/24, guest
VLAN 10 is .10/24, management
Switch is on .2 inside each vlan.
All are trunked to a USG via port 0, which has a USG doing the routing and firewall.
Ports 1/2/4/10 are all trunk/native 1 to drops inside the house.
Port 4 is vlan tagged 1 for a single device.
Ports 22 and 23 are access ports for server, and the first 10gbe port is a trunk to server 10gbe adapter.
Everything is native vlan 1
(ArubaS2500-24P-US) #show vlan
VLAN CONFIGURATION
------------------
VLAN Description Ports
---- ----------- -----
1 VLAN0001 GE0/0/0-4 GE0/0/6-23 GE0/1/0-1
10 mgmt GE0/0/0-3 GE0/0/5 GE0/0/10 GE0/1/0
15 private GE0/0/0-3 GE0/0/10 GE0/1/0
98 iot GE0/0/0-3 GE0/0/10 GE0/1/0
99 Guest GE0/0/0-3 GE0/0/10 GE0/1/0
(ArubaS2500-24P-US) #show trunk
Trunk Port Table
----------------
Port Vlans Allowed Vlans Active Native Vlan
---- ------------- ------------ -----------
GE0/0/0 ALL 1,10,15,98-99 1
GE0/0/1 ALL 1,10,15,98-99 1
GE0/0/10 ALL 1,10,15,98-99 1
GE0/0/2 ALL 1,10,15,98-99 1
GE0/0/3 ALL 1,10,15,98-99 1
GE0/1/0 ALL 1,10,15,98-99 1