Arista newer firmware version on upgraded DCS-7050S-64

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
S

salvadorb

Member
Jul 14, 2021
45
2
8
Hi guys,
I have some Arista DCS-7050S-64 switches with upgraded memory (8GB of RAM) and 8GB of storage, but since they are an EOL platform (according to Arista anything above equal or above 4.19 don't support it) I haven't loaded anything newer than firmware 4.18.11M on them. I assume the problem with newer versions on default storage models is the limited storage capacity, but since they have been upgraded to 8GB that shouldn't be the limiting factor
Does it know or have tested if a newer version of EOS, and which one, on this model?

Best regards,

Salvador
 
W

webjunkie

Member
Mar 17, 2016
59
27
18
I believe they removed support for the platform in newer versions of EOS, so even if you have upgraded the RAM/Storage of the switch, it still won't work because the underlying chips used in the switch are not supported.
 
You must log in or register to reply here.
Top Bottom