Amazingly fast delivery from fs.com

[Scott Laird]

Apparently fs.com's new US warehouse is up and running. I ordered 8 Juniper SFP+ modules yesterday around 3:45 PM PST, they were marked as shipped just before 7 PM PST, and they were delivered around 10:15 AM this morning. I'm in the Seattle area, so they didn't have far to travel, but that's a dramatic improvement over their old delivery times.

 

[azev]

wow good news, I needed a few things from them but hesitate due to the long shipping times. Did the sfp works well btw ?

 

[Scott Laird]

The ones I've ordered in the past worked well. Today's are still in the package.

 

[RyC]

Lucky! I ordered Ubiquiti "compatible" SFP+'s and fiber patch cables and they all shipped from China. The fiber was actually holding up the order from going out for a couple of days.

The SFP+ modules came right up in the US-16-XG!

 

[pc_doom]

Another good news.

 

[crackkxxx]

Hope more items can be shipped from Seattle, so I won't wait so long time.

 

[azev]

I wish they would post which product they stocked in the US distribution center.

 

[whitey]

Apparently fs.com's new US warehouse is up and running. I ordered 8 Juniper SFP+ modules yesterday around 3:45 PM PST, they were marked as shipped just before 7 PM PST, and they were delivered around 10:15 AM this morning. I'm in the Seattle area, so they didn't have far to travel, but that's a dramatic improvement over their old delivery times.

Yep, I've shot in a few fs.com orders and first off I got this really cool/responsive rep Talia (maybe some of you have her taking care of you as well), anyways last couple orders get here w/in 2-3 days. All smiles :-D

Here's a U.S. transceivers parts list link they gave me.

US Inventory Transceiver Stock List | FS.COM

 

[whitey]

Lucky! I ordered Ubiquiti "compatible" SFP+'s and fiber patch cables and they all shipped from China. The fiber was actually holding up the order from going out for a couple of days.

The SFP+ modules came right up in the US-16-XG!

Mind sharing a PN?

This one maybe?

Customized 10GBASE-SR SFP+ 850nm 300m DOM Transceiver

 

[azev]

for those who have purchased cisco transceiver from fs, do you mind showing transceiver details from the switches/routers??
Does the transceiver rom programmed as a cisco model sfp or qsfp or do you have to enable the 3rd party transceiver hidden command (service unsupported-transceiver) ?

 

[RyC]

Mind sharing a PN?

This one maybe?

Customized 10GBASE-SR SFP+ 850nm 300m DOM Transceiver

Technically it looks like it's this one:

Customized Compatible 10GBASE-SR SFP+ 850nm 300m IND DOM Transceiver with the Ubiquiti drop down selected. The module label does have "UB" printed on it (if that even means anything). The part number appears to be the same between the two links so I'm not sure what the difference is. I did order through a rep though.

 

[pc_doom]

I wish they would post which product they stocked in the US distribution center.

You can check here.

 

[Scott Laird]

FWIW, the modules I ordered work fine with my Juniper. Here's what Juniper's diagnostics look like:

> show chassis pic fpc-slot 5 pic-slot 1
FPC slot 5, PIC slot 1 information:
Type 8x 1G/10G SFP/SFP+
State Online
PIC version 3.7
Uptime 36 minutes, 25 seconds

PIC port information:
Fiber Xcvr vendor Wave- Xcvr
Port Cable type type Xcvr vendor part number length Firmware
0 10GBASE SR MM FiberStore SFP-10GSR-85 850 nm 0.0
1 10GBASE SR MM FiberStore SFP-10GSR-85 850 nm 0.0
2 10GBASE SR MM FiberStore SFP-10GSR-85 850 nm 0.0
3 10GBASE SR MM FiberStore SFP-10GSR-85 850 nm 0.0
4 10GBASE SR MM FiberStore SFP-10GSR-85 850 nm 0.0
5 10GBASE SR MM FiberStore SFP-10GSR-85 850 nm 0.0
6 10GBASE SR MM FiberStore SFP-10GSR-85 850 nm 0.0
7 10GBASE SR MM FiberStore SFP-10GSR-85 850 nm 0.0

> show interfaces diagnostics optics xe-5/1/0
Physical interface: xe-5/1/0
Laser bias current : 10.090 mA
Laser output power : 0.3270 mW / -4.85 dBm
Module temperature : 30 degrees C / 86 degrees F
Module voltage : 3.3650 V
Receiver signal average optical power : 0.3970 mW / -4.01 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 15.000 mA
Laser bias current low alarm threshold : 0.000 mA
Laser bias current high warning threshold : 12.000 mA
Laser bias current low warning threshold : 0.000 mA
Laser output power high alarm threshold : 1.9950 mW / 3.00 dBm
Laser output power low alarm threshold : 0.1170 mW / -9.32 dBm
Laser output power high warning threshold : 1.5840 mW / 2.00 dBm
Laser output power low warning threshold : 0.1860 mW / -7.30 dBm
Module temperature high alarm threshold : 80 degrees C / 176 degrees F
Module temperature low alarm threshold : -15 degrees C / 5 degrees F
Module temperature high warning threshold : 75 degrees C / 167 degrees F
Module temperature low warning threshold : -10 degrees C / 14 degrees F
Module voltage high alarm threshold : 3.600 V
Module voltage low alarm threshold : 3.000 V
Module voltage high warning threshold : 3.500 V
Module voltage low warning threshold : 3.100 V
Laser rx power high alarm threshold : 1.9953 mW / 3.00 dBm
Laser rx power low alarm threshold : 0.0490 mW / -13.10 dBm
Laser rx power high warning threshold : 1.5849 mW / 2.00 dBm
Laser rx power low warning threshold : 0.0776 mW / -11.10 dBm