You've done no other tweaks than setting threads to 12?I'm running numthreads=12 with the av1 image on both the D-1541 and D-1537. I'm getting approximately 1040 H/s on the D-1541 and 860 H/S on the D-1537.
I'm running the AV1 image as well. But using numthreads=12 I only get 881 H/s on my Xeon D-1541.Nope. That is running the av1 image though instead of the priv image. On the priv image I was running numthreads=6.
Ahhh I'm seeing my hashrate go up. Went from 881 > 895 > 907.I'm running the AV1 image as well. But using numthreads=12 I only get 881 H/s on my Xeon D-1541.
I followed your lead and also bought a few of the SuperMicro boxes. I did not realize I needed a V1 CPU just to get the server to boot. With the E5-2680v2 in place, it does not get past the initial Post beep. Although I can hit the IPMI. But, the seller must have changed the default password as ADMIN/ADMIN does not work. Just ordered a couple E5-2603v1 off of Ebay and will have to wait another week to get these started. I hate to wait for stuff like this....The first one I bought did. The next 4 did not. You'll want a v1 laying around.
One is all you need. Boots fine in the rear slot (square ILM).I followed your lead and also bought a few of the SuperMicro boxes. I did not realize I needed a V1 CPU just to get the server to boot. With the E5-2680v2 in place, it does not get past the initial Post beep. Although I can hit the IPMI. But, the seller must have changed the default password as ADMIN/ADMIN does not work. Just ordered a couple E5-2603v1 off of Ebay and will have to wait another week to get these started. I hate to wait for stuff like this....
It’s open source bro. Shilling your miner much?
Sent from my iPhone using Tapatalk
Anyone got any hashrates for the AMD 6212 processors?
did you quote the wrong user? I don't have any Ryzen hardware.hello. can you give me your config for ryzen 1600 on aeon?
That number seems a bit...ambitious. I have no direct experience with that chip, but with my 4x Opteron 6276 machines I get just a touch over 500H/s per processor.Pair of 6236
Monero 794h/s
Aeon 2500h/s or 1250 h/s cpu
I would suspect around 900-950 h/s per cpu
I could get 2300 h ( Aeon ) now , using 2 XMrig threads , one with 6 Core s and CPU Affinity of 0x5554 (1730 h/s) and one with 2 Cores and cpu Affinity of 0x5 ( 570 h/s ) , if i close the 2 Core Thread i can work normal with the computer , if i am only mining ( over night e.g ) i start the 2 core Threadhello. can you give me your config for ryzen 1600 on aeon?
Yes , an RX480 Red Devil , flashed to an RX580 Asus Strix - works well ...@MK_one am I correct to assume an AMD GPU for the dual mining or something else?