Adaptec 51245 Drive with failed segments

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

perdrix

Member
Mar 3, 2016
75
7
8
71
Woke this morning to find the RAID card shouting at me.

Looking at Adaptec Storage Manager, on of the physical drives is marked with an !

upload_2019-12-17_9-25-29.png

But if I select the physical device I can't mark it as failed, nor can I ask the logical to run a Verify?

What should I do? Just pull the device and plug in a replacement - that doesn't feel right :(

Thanks, David
 

azev

Well-Known Member
Jan 18, 2013
768
251
63
agreed with vanfawx, but if you insist on testing the drives, you could pull the drive out wait a bit make sure it is completely removed from the array, then plug it back in... I've done this before due to drive dropping when smart report shows healthy drives and it started rebuild to repair the array.