EU 144 bay storage chassis for £399.... with probable limitations

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Rand__

Well-Known Member
Mar 6, 2014
6,634
1,767
113
Hard disks
Up to forty-eight 3.5-inch SATA II drives of 500 GB, 750 GB or 1 TB capacity each (48 TB total array enclosure capacity), 3 Gbit/sec data rates, hot-pluggable.
 

Rand__

Well-Known Member
Mar 6, 2014
6,634
1,767
113
:)
I was more looking at 3GB/s as a limit which implies it will have the usual >3tb issues as well.
 

malakian

New Member
Apr 8, 2018
2
0
1
34
hum, if we change the HBA, maybe less limitations? :)

J4500 are based on LSI expanders (x36). With an good LSI card, connected with 4*3Gbps (yes, JBOD -> HBA = 4*Uplink speed, i've already a lot of dell/custom racks in 4*6Gbps with one SAS cable), so... 12Gbps.

And then, maybe 4/6/8/10/12.. TBs drive will be working, i don't think SAS expanders are limited based on disk model, no? :/
 

i386

Well-Known Member
Mar 18, 2016
4,245
1,546
113
34
Germany
If I remember correctly Sas1 (between hba and HDD/SSD) uses 32bit for adressing. With 512b Block Sizes you are Limited to 2tb , with native 4k Block Sizes to 16tb HDD/ssd.
 

Patrick

Administrator
Staff member
Dec 21, 2010
12,514
5,805
113
Signaling is still an issue.

If you had a maximum of 2TB drives that gives you 288TB of capacity, or a single 24-bay full of 12TB drives worth. You have less drives to deal with, newer components, and 24-bay enclosures are inexpensive these days.