The above is almost exactly the same as older green N100 and N150 listings on Amazon.
- 【 Storage and Memory】1* DDR5 slots, compatible with 4800/5200/5600MHz (non-ECC), RAM supports up to 32GB, 6* SATA3.0 with 6Gbps (SATA1 is native, SATA2-SATA6 is extended by the JMB585 chip) and 2* M.2 NVMe 2280 PCIE3.0x1, stable and ultra-fast transfer speed.Dual 4K Display: This mini-ITX board has HDMI2.0 and DP1.4 ports at 4K@60Hz.
I got this cooler ID-COOLING SE-214-XTHello Friends
I got the CW-NAS-ADLN-K (N150) today. I bought it without cooler since Nascompares on yt recommended to not use the bundle cooler.
But which cooler fits this board? I cant use my old Intel stock cooler because of the capacitors are in the way. Looks like this is gonna be a problem with most coolers.
Any suggestions?
Thanks for the tip. It looks like a good cooler and its not that expensive eitherI got this cooler ID-COOLING SE-214-XT
I am planning on using a regular mid ATX case with 4+ HDD bays. I will update later.
My thoughts were to try to run it without a fan and see what the temps look like. This server will not see any heavy action.Thanks for the tip. It looks like a good cooler and its not that expensive either![]()
Also in /dev/dri I have a card0 file..No device filter specified and no discrete/integrated i915 devices found
You Sir, are a legend.So i have some news for BKHD boards, if you go to Bios and then go to Chipset---->system agent configuration--->graphics configuration and set "yellow screen workoround" to enable, you will unlock all settings in bios.