server

Hi everyone, I have a question regarding a setup that I am building for an educational VDI environment. Below is the list of my current hardware that I have been approved for buying... Gigabyte R282-Z92 (shorturl.at/ruPQ6) AMD EPYC 7742 (x2 so a total of 128 cores) 64GB DDR4 LRDIMM (x32...

Hi There, I'm posting this message in the hope that here I find some opinions, tips, alerts on building a new server. It's a loooong message, so please bear with me, I really need opinions to make an edutated choice. My intention is to build a server for a (very) small company, in order to...

I'm looking to build/buy a high-performance NVMe storage server for virtualization purposes. I need a server with at least 8 hot-swappable nvme (or with storage, adaptable to nvme drives, u.2 maybe?) that does not break the bank(prefferably, under $10K without the drives) Plain nvme...

Hi all I'm currently rocking a HP DL180 Gen6 12 bay, populated with 2 x 3TB SAS Parity Drives, a 500GB SATA SSD for Cache, and 9 x 2TB SAS drives for the array running under UnRaid. I'm currently running out of space, so slowly working my way thru upgrading to 3TB drives on the array....I've...

Hey Guys I'm trying to sell my trusty old Server the Lenovo x3550 M4. It comes with one Xeon E5-2620 V2 and 8gb SK Hynix ram. It has the second backplane for a total of 8 2.5 inch Drives installed(none included). The installed Raid controller is the M5110 with 512mb Cache and battery. My...

Retooling my backup solution to have more space and failover potential. I have 2 1U servers left over from an older project both identical with 4 3.5" bays. I am wanting to have a somewhat large network backup target. Mainly for accessible archived storage for potential later use. I have a few...

2x E5-2640v2 @ 2.00 GHz Memory: 64 GB Slots: 1x PCI-Express 3.0 x8 Slot (Full-height, Half-length) SATA: 2x SATA3 Ports; 4x SATA2 Ports Ports: 7x USB 2.0 Ports (4 rear, 2 via header, 1?Type A), 1x VGA Port,?2x Serial Ports, 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port Form...

A ES EPYC seller are selling some ES EPYC. He claimed that the CPUs can only boot with a Dell R6415 or R7415, but i found that some seller on Ebay are selling the ES EPYC with the same model. And i asked another seller on Ebay, he told me that this model of ES EPYC is compatible with Supermicro...

Dear OmniOS users, I'm wondering how feasible it would be for me to install pkgsrc and keep all its dependencies separate in OmniOS 151030? I keep finding myself needing packages that are not available in the omniosce repos. pkgsrc installs all its own dependencies into /opt/local Is there a...

Hello, I have two X5660s and a Tyan s7012. I had some issues getting it to post but was able to get it to post with a single X5660 installed. When I install the second, the system fails to post. I have updated the bios to the most recent revision. A green light blinks near the second cpu...

i have two H8DGU and one H8DGU-F servers with dual Opteron 6276 CPUs. the H8DGU-F has the 1U version heatsinks and the H8DGUs have 2Us. 2GB DDR3 ECC(1GB sticks) per CPU. PSUs are included. each has fans if wanted. looking for $175 shipped/each OBO. can work something out for the lot. i have 4...

SuperMicro X8ST3-F Motherboard (X58) [LGA1366/DDR3] INTEL i350AM2 NIC Rosewill RSV-R4000 1.0mm SECC 4U Rackmount Server Chassis with 8 Internal Bays INTEL XEON X5650 6 CORE 2.66GHz 12MB CORSAIR Vengeance LP 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Noctua cooler and case fans ATI...

Hi, I have built and used successfully a home server for machine learning with two GeForce GTX 1060 (6Gb)s. I am now looking to invest in a rack server to run some models and research further, but I am quite stuck. In general, does anyone have a suggestion for a mid/low-range rack server of...

Hello, Just decommed a rack PC and replaced it with a NUC (for anyone that doesn't know, I made a post about the NUC7i7 and how its GOD mode, love them!) Anyway, I'll ship this in the case or will take the parts out if anyone wants. I always include a free BONUS item (Tablet, SSD, HDD, cell...

So I've been running my main vSphere host on 4 250G WD Blue SSD's in Raid5 for a while now. I went for the Blues as my raid controller somehow hated the Samsung 850EVO/PRO's. Now I know that running consumer SSD's like that is anything but best practice (especially for hosting a ton of VM's) and...

Looking to purchase 4-8x large 2TB, 4TB, or higher 15TB SSD's for a server. Please let me know what you have! Thanks!

Hello sth people! That's my first post here. :) I am looking to replace my R710 and because I need single core power, I want Xeon E2186G or E2176G. Right now my only option is Dell Precision 3930 which is not server OS supported by Dell. Does anyone know when the 3 big brands will release this...

Hi, I have 3 HP DL 360 Servers, they were backup stock, so when I got them a few months ago it was the first time they were turned on. Specs are below, I have Rails and boxes for these. CPU 2X E5-2670 V2 10 Core / 20 thread 2.50GHZ Memory 32GB HP 4 X 8GB 713755-071 Memory Smart Array P420i...

Hello, Just took apart some rack mount servers that had 3x 1u ATX 400w and 1x 500w psu. Looking to sell them all together for $200 shipped. All working and functional, as always I'll throw in a free gift (SD card, RAM, etc.. just ask!) PM for questions 3x 400W + 1x 500W $200 OBO Shipped...

I built this at the end of last year but have since decided to use 3x Cisco UCS servers for my hosts. Specs: 1x CSE-216 SAS2 24-bay 2U chassis with SAS2-216EL1 backplane 1x Supermicro X10DRI-B Dual LGA2011 EATX Mobo 1x Supermicro Active CPU Heatsink SNK-P0048AP4 1x Intel E5-2630v3 2.4GHz...