Hi, I am new to PCIe and SATA details and I would like to know if the number of raid stripes should match the SAS/SATA cable lines used by my controller.
My machine is a DELL PowerEdge T40 with Debian GNU/Linux and an LSI controller 9207-8e plugged on a PCIe 3.0 slot connected to the PCH and...
This is a TrueNAS server that was using all Seagate Ironwolf 10TB drives (model ST10000VN0004).
One of the drives failed, and the RAID array is running in Degraded state at this time. I replaced the failed drive with ST10000VN0008 which is the current model of the same drive.
The problem is...
Hello,
I am having a lot of trouble flashing a Fujitsu D3116 which is based on the LSI SAS2208 to 2308 IT Mode.
What I'm currently stuck on is that the sas2flash utility wont detect my Card.
Already did a couple of different attempts which I want to lay out here:
Use megarec to write a 256B...
Hey!
Does any of you know which of the above-mentioned chipset runs cooler/hotter in a medium airflow environment?
I need a new HBA for my FreeNAS home server and since the cards with these two are almost priced identically now (used on ebay) I would rather go with SAS2308 since it’s PCIe 3.0...
Here's my question in a nutshell: what are the benefits, if any, in upgrading SAS2008 cards to SAS2308 cards, besides offering PCIE 3.0 bandwidth and being capable of handling more devices (1024 vs 512)?
If you had a server that only supported PCIE 2.0, containing several SAS2008 cards running...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.