Hello everyone,
I'll admit, I wasn't thinking and bought 2 of these on eBay. If I'm correct, it looks like the date code is 08/2021. I'm also going to assume these are Samsung PM1643A drives with HPE firmware.
So, if these are low hour/low use drives, is it worth trying to get them back to...
This isn't really a 'guide' but more 'how I did it.'
Hardware: PCPartPicker
For starters, I'm working on a Quanta S210-X22RQ 2U LGA2011 (some fellow strugglers).
Mine came with 2 SAS controllers,
the LSI MegaRAID SAS 9261-8i 6gb/s for the front bays
and LSI 2008 mezzanine 6gb/s (DA0S2GTH8B0)...
Please Help!!
The card seems to be stuck.
I don't know where to go from here.
From eBay, IBM Lenovo ServeRAID M1210. It said it was flashed to IT mode. However, this is in the dmesg:
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
mrsas0: <AVAGO Fury SAS Controller> irq 41...
Will ship all items internationally via DHL with insurance (see below)
Payment options offered vary on a case by case basis - local pickup or bank transfer preferred.
Every buyer may do a live test at my place if picking up in person.
I have several ebay accounts with around 2000 points...
I have two brand new in sealed anti-static bags from Dell HBA345
this HBA's use the new tri-mode controllers from LSI for nvme drives sas and sata.
more info here...
Hi!
I have an issue with my Seagate Exos X10, the model ST10000NM0096.
Problem are that i have two HBA card flashed into IT-Mode, one LSI 9210-8i and 9211-8i. These cards WONT see or spin up the drives at all. I have it connected via this cabel Mini SAS 36 SFF-8087 to (4) SFF-8482 Connectors...
I want to maximize the speed of the 12Gbps SAS interfaces in my 2U - 4 node QUANTA servers.
I know my choices are to either go full SSD, or SSD cached Hybrid HDD.
I have 6 SAS 12Gbps slots per server node.
Right now I have an SSD in slot 1 and the remaining 5 slots are HDD.
When I benchmark...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.