romed8-2t

Just wondering if anybody on here is using or has tried a LRDIMM + Asrock ROMED8-2T + EPYC 7002 combination and can comment on their experience. I see a lot of posts here about issues with LRDIMM ram on supermicro/H12SSL boards along with a couple of comments indicating this combo works...

Hi everyone, I'm building a GPU cluster and encountering a challenge with the GPU topology. Here's my setup: Motherboard: ASRock Rack ROMED8-2T GPU Configuration: 5 x RTX 3090 GPUs inserted into PCIe slots 1–4 and 6, connected with PCIe 4.0 risers. The system is functioning well overall, but...

Hi all After going through all the posts related to ROMED8-2T in which i learned a lot of things (but sadly none help me resolved my problem), im posting here to try my luck.. I have 3 ROMED8-2T with EPYC 7313 on a chassis with triple backplane with minisas ports (SFF8643). there are 2 EVO 870...

I must be doing this wrong because no matter how I set the PCIE2 Selection Jumpers for my ROMED8-2T board, I cannot see the two Micron 9300 Pro U.2 drives connected to the two OCU1 & OCU2 connectors on the board using two of these cables: PCIe Gen 4 16 GT/s OCulink (SFF-8611) to U.2 (SFF-8639)...

I got an ASRock Rack ROMED8-2T motherboard and I might want to connect just to extra Intel U.2 5520 drives to it and since I haven't used the Oculink connectors the board has, I was thinking the easiest way might just be to use those. Does anyone have a recommendation for a specific cable to use...

Hi all. I'm completely new to server builds and just built my first PC. It's based on the ROMED8-2T with an Epyc 7302P. 128 GB RAM (32x4). I have a 2TB SSD. 2x1TB M2 SSDs. 12TBx6 HDDs that will ultimately be in a raidz2 config. Noctua cooler. Corsair 750 power supply. Housing is Fractal Design...

Long post but hopefully it explains most of the questions (that I would have if I were a potential purchaser). Selling: AMD EPYC 7543 (Milan) 32 core / 64 thread 2.8ghz turbo 3.7ghz 225w 8 pieces Samsung 32gb ecc ddr4 3200ghz (256Gb) m393a4k40eb3-cwe Asrock Rack Romed8-2T motherboard -...

Hi, After waiting ~1.5 months for a replacement board (original one had one network port non-functional), I've reinstalled all previous hardware but having issues booting up. If I do not install any GPUs the board boots up fine. The replacement came with BIOS v3.20, I tried to update to v3.40...

Hi, I’m having a hard time to control fans on an ASRock romed8-2t. Via IPMI I can make and save settings but what ever settings I make, the fans will always spin at max… Even if I do someting very simple like selecting manual mode and sat duty to 20, the fan will still spin at max speed, even...

Can ‘Resizable BAR’ be enabled on EPYC Milan? I use EPYC 7443P on ROMED8-2T servers for broadcast video with RTX A6000 GPUs which support resizable BAR, but have not found a way to enable it in the BIOS. Is this even possible on EPYC? I have Zen3-based Ryzen systems on X570 boards which can...

Hi, This is my first AMD based build of this kind after the 10 years old Intel 5520SCR/Areca ARC-1880ix-12 based workstation/storage died last year and I decided to go with AMD, which I always wanted. Components: MB: ROMED8-2T BIOS: P1.10 BMC: P1.00.00 CPU: AMD EPYC 7702P (100-100000047WOF)...