1. Necrotyr

    OPNsense: Portforwarding over vpn tunnel

    Right, I about to go insane trying to figure this out. tl;dr: Unable to make inbound PAT over VPN tunnel work, outbound works fine. I have an VPS with a bunch of public addresses I want to use in my homelab, to this end I've installed opnsense on the VPS, as this is the firewall I'm also using...
  2. L

    Virtualized pfSense OpenVPN performance tweaking

    Welcome to the $1,000,000 question topic :D My OpenVPN install residing on an ESXi 7 host (E5-2695v2, 4C allocated, 8GB RAM) is able to push barely 200Mbps through OpenVPN with Hardware-based VT and IOMMU enabled for the VM. Algorithm is currently AES-128-GCM. Two VMXNET3 NICs are configured...
  3. S

    Atom C2758 on borrowed time?

    I have a Supermicro C2758 running PFSense as my main router, on gigabit fiber with an OpenVPN server. It's been freaking amazing since I deployed it and I just assumed I could keep it going forever. I was totally out of the loop on all the discussions of the Atom C2000 AVR54 bug that renders...
  4. J

    opnsense vpn performance - e3-1220

    I am considering using a Dell Poweredge R210 II as an opnsense firewall for my work lab. How much should this be able to handle of plain routing, vpn (ipsec? openvpn), ids etc. It has 16GB ram and a Xeon e3-1220 (4 core 3.1Ghz w/aes-ni) -jannis
  5. svtkobra7

    pfSense on Google Compute [anyone have experience???]

    Does anyone have any experience creating a VPN server in Google Compute? And can lend a hand? Note: I'm not referring to the VPN server offer that Google Compute provides, rather rolling my own. It is more cost effective to use an "always free" f1-micro VM instance + pay for network egress...
  6. Patrick

    OpenVPN for Windows to pfSense - route addition failed using CreateIpForwardEntry

    I have the strangest issue with OpenVPN for Windows. I have a VPN that will come up, but it will not pass traffic. I am using the same configuration and same client that will connect and pass to other VPN endpoints, so I know the client software is working. I checked configs of both server and...
  7. Geran

    Advice on firewall software/appliance

    So after building up my network over the last couple months with the approval of the boss (aka wife), I believe I'm finally ready to replace my ISP's router with something a little better. My setup consist of the following items currently: Ubiquiti Networks US-48-500W Ubiquiti UAP-AC-PRO...
  8. A

    Disabling OpenVPN encryption over TCP on PIA

    I question whether anyone here can be of assistance considering this is a problem with Private Internet Access, and not a server question, but it can't hurt to ask. I am desperately looking for a way to disable OpenVPN data encryption and authentication over TCP using Private Internet Access'...