Not sure why these are just 50US$ per TB. I have no knowledge about these drives and therefore this post comes with caution while the pros here might think it's not a good deal because of ..... So sorry in advance if this is just a waste of space. Unfortunately not so attractive with customs...
Selling out my lab.
Even thougn Apple XSAN died long ago until now I used it successfully with this setup.
HPE SAS 12G 15.36TB(aka Samsung PM1643)
6x
1500€
have HPE caddies, firmware HPD8, 512B
Huawei SAS 12G 7.68TB
12x
700€
512B
Samsung SATA 6G 845DC PRO
8x
150€
10TBW 5Y
Dell SATA 6G...
I'm looking to get an M.2 to U.2 SFF-8639 for my two WDS192T1D0D. I've seen a few on Amazon but they have dodgy reviews. What are you guys using that you can recommend?
Not much info in terms of specs but it has to be a somewhat newer NVMe spec at this capacity. Just at a price per GB standpoint, it's not bad at all.
WP Expanse 7.68TB eNAND 512e PCIe Gen3 x4 NVMe U.2 2.5-inch SSD | ECC PLP 1DWPD | Enterprise Data Center SAN Solid State Drive - WECP5S310768S...
Hi,
I started to receive weird power failure messages from Slot(12) which seems to be one of the 2x NVMe ports below.
and
The correct error message from SYSLOG is ...
The other issue is if I boot the machine without connecting both ports and plug in one port, I receive the same message...
https://www.supermicro.com/en/products/chassis/compact%20mini-tower/721/sc721tq-350b
Looking for a mini-ITX chassis with 4 front load NVMe?
`
Does it exist?
Hi, I work for a research hospital. I would appreciate any comments or advice for file system and hardware design for a high-end storage solution. We have a few microscopes (running windows 10), each can produce 3-4GB/s of image data that needs to written to the shared storage and to be...
I got a 12600K used from a friend, and am deciding to build a NAS out of it with TrueNAS SCALE.
The one thing that's exciting me is that this system would have a PCIe 5.0 x16 slot, which is a ton of bandwidth for things like M.2 NVMe drives - but I haven't found any sort of adapters or HBA's...
Looking for the above with the usual candidates in a U.2 form factor only. Life-Endurance should still be > 80-85%.
Quantity up to 6.
I'm not able to pay more than 120-150 EUR/TB
Shipping to Germany/Poland/Sweden ... what's better for you or cheaper for me.
For sale refurbished HP EliteDesk 800 G5.512Gb NVME m2 drive. There is space for one more NVME drive on the motherboard.No CD drive. Power cord, keyboard and mouse included. Windows 10 Pro.Under HP warranty until December 2022. $550 shipped continental usa
Timestamp
The accessories page of Supermicro has the following description for the BPN-NVMe3-216N-S4 backplane:
So is it compatible with any SC216 chassis? They all have 24 bays - 2U Chassis | Chassis | Products - Super Micro Computer, Inc.
I'm building a new 2U server with Supermicro X10DRD-iNTP boards and I'm wondering if there are any short Adapter SFF-8643 to U.2 adapter cables below 50cm in the market. Unfortunately, I can't find them. The board has 2 PCI-E 3.0 NVMExpress x4 External Ports nicely close to the case wall where I...
So I recently acquired a new server for my lab, now I'm debating on storage options. I'm looking for around 2TB, also nothing mission critical is planned on this machine, hence a single SSD would be enough for now. Since price difference between SATA and NVME is negligible and SAS (12G) is...
I've recently purchased a Gigabyte MZ72-HBO mobo and there are two U.2 NVMe (#38 & #39 on the board diagram in the user manual) ports attached to the CPU0.
Rather naively, I assumed this meant that I could connect a SlimSAS to MiniSAS cable and run the Icy Dock MB720M2K-B 4x M.2 NVMe cage out...
I have the following drives/controllers for sale. All are either new/open box or just used for some benchmarking tests. Paypal and US only. I will pay fedex expedited shipping. Everything is in excellent condition and I will gladly accept returns if needed. All items include best offer as...
Hi everyone.
I’m planning out my next server build, but need some help on the storage side.
I've been looking at the LSI 9400-16i HBA since it will do sata/sas and nvme.
But I need some help with the nvme part.
My plan is to run 4 x nvme in x2 mode so I can run 2 x nvme pr. port the controller...
Dear all,
is DFM (DirectFlash Module) from Pure Storage with interface U.2 can be detect or opened with Mini SAS HD to U.2? I wish this DFM can be used on my PC as Flash Storage NVMe heuheuheu...
Regards,
Irfan
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.