motherboard

Hello all, I'm having issues with getting my setup working. MOBO - Supermicro X9SCM-F REV 1.11A BIOS 2.0A IPMI Firmware 1.27 Ram - (2) kvr1333d3e9sk2/8g kits 16GB total (4X 4GB Sticks) CPU - i3-2100T PSU - Corsair HX750 or PC Power and Cooling PPCMK3S400 I can not get the system to stay...

I'm running a Tyan tomcat n3400b bios v2.01 Quad core American Megatrends On board Card basic standard 8g ram Windows 10 Last night I tried to flash bios, which was successful at the end but went into a black screen, I waited for 5 mins to see what's next, nothing happened so I reboot it and...

Hi All! This is my first post and question, so please be patient. :rolleyes: May you kindly point me out some available board or system actually supporting the LGA1356 Xeons E5-2400 v3 (Q1-15)? Thanks in advance for any hint!

I have 10 C6100 chassis [40 nodes total] running a render farm. I ordered 8 spare boards, RAM and CPUs when I got the original order. This setup is obviously on a heavy load, maxing out the CPU for hours at a time. These are located in a server room with sufficient air-conditioning, with room...

Hello, I bought a motherboard X10DRC-LN4+. I powered it on, CPU and memory are Ok, I can access the BIOS. But it doesn't detect any SAS and/or SATA driver. Also a red led is always on near SAS controller. The manuals says that it means : "SAS controller error". Can anyone help me to fix this...

Evening all, I am in the process of building a home ESXi server and have run into a couple of different issues. Was hoping someone might know more than I (easy enough in this case) and could possibility give me a bit of direction... This is the system that I've put together so far...