m5110

I'm trying to flash an IBM M5110 card to IT mode but the controller is not detected by megarec. I have been following this guide: Cross-Flash IBM ServRAID M5110 and H1110 to IT HBA Mode – an Ephemeral Memoir of the Lazy Mocha supplemented with the three other guides linked in it (the guide skips...

Hey Guys I'm trying to sell my trusty old Server the Lenovo x3550 M4. It comes with one Xeon E5-2620 V2 and 8gb SK Hynix ram. It has the second backplane for a total of 8 2.5 inch Drives installed(none included). The installed Raid controller is the M5110 with 512mb Cache and battery. My...

I accidentally bricked my raid card while flashing the bios. It's been lying around for some time, so I honestly don't remember whether it was just an update or a failed try to reflash it with an LSI bios. I'm guessing that it will need the care of someone who is able to replace the bios chip...

Hi. I bricked my IBM m5110 while updating bios via Windows MegaRAID Storage manager. I have such message: "F/W is in Fault State - MFI Register State 0xF0010002 Adapter at Baseport is not responding No MegaRAID Adapter Installed" I' tested: 1. LSI recovery firmware from LSI Preboot CD - it...

Hi everyone, new to the forum and just got an M5110 board with serveraid firmware, read many articles but didn't find answers unfortunatly. The main point is.. How to update firmware in a system that is not an IBM server? While trying to update it, there is a control of the system in which the...

I've bought a new IBM ServeRaid (LSI) M5110 SAS/Sata Raid Controller (81Y4481), 512 Cache Upgrade for Raid 5 (81Y4484) and Battery Pack 81Y4508 Firmware version of controller is 3.340.75-3372 FW Package 23.22.0-0024 In the Hardware Setup, via Configuration Wizard, Manual Configuration I've...