fujitsu primergy

  1. G

    Fujitsu PRIMERGY TX1320 M3 PSU planning Noctua NF-A4x20 PWM fan swap. Anyone done this before?

    I’m running a Fujitsu PRIMERGY TX1320 M3 with the 450 W Platinum Hot-Swap PSU (Fujitsu A3C40172099 / S26113-E575-V70 / S13-450P1A). It works perfectly except the PSU fan is insanely loud (ofc cuz its a server psu fan). What i know so far: PWM-controlled fan, tach required for PSU to start...
  2. M

    Tips for Installating Proxmox on Fujitsu Server 'Primergy RX300 S8'

    Hello everyone! I was kindly given a Fujitsu server 'Primergy RX300 S8' with 256GB ECC RAM by a colleague at work, as he had been fired. Now, in addition to the server, I've got 16 SAS disks and the additional controllers, which I'm considering flashing into IT mode in order to partially...
  3. G

    Help with my Fujitsu server fans

    Hi everyone, I'm getting closer to joining the homelabber club as I've bought a Fujitsu Primergy TX1330 M2 with a E3 1270 v5 and 16GB of Ram for the low price of 100€. However, I can barely keep it turned on! The main fan, properly connected to the FAN SYS 1 header as shown on the side panel...
  4. G

    build: Cheap Fujitsu TX1330 M1 low power (25 watt idle) Truenas box

    Just posting here for others who might be interested in getting the same hardware. Couldn't find much info so here it goes. Purpose: all-in-one home server with virtualization and relatively fault-tolerant file storage. My requirements are: low price, 4 cores (speed not that important), ECC...
Top Bottom