firmware

Good evening all. I picked up an R720 last month with an iDRAC7 active Enterprise license and would like to update the iDRAC firmware. The current firmware version is: 1.57.57 (Build 04), last updated Oct 2 09:17:51 2014 I see the latest version is: iDRAC with Lifecycle Controller v. 2.63.60.62...

Hi All, I have just go a bunch of these HP HSCP1920S5xnNMRI 1.92TB SSD (HGST HUSMR1619ASS204) drives and I guess they are 3PAR ones (with default P100 Firmware written on label). Just wondering any one could supply a latest firmware for these drives? Seems couldn't find anything on the...

I have a HPE-rebranded Seagate XF1440 NVMe drive with model number VK001920KWDUH. Its preinstalled firmware is HPK2. I can find HPK4 on HPE site, but they only provide a Linux-based updater for this version. I don't want to burn a Linux Live CD for doing this, so I tried to extract and replace...

Hello Everyone, I need Generic Seagate Firmware (0004/0006) or just LOD file for ST9600204SS that is Savvio 10k.4. Thanks

They came from a dell server/equal logic and I'm struggling to get Storage Spaces Direct working so my last ditch effort is to update the firmware. I downloaded the dell utility but I'm not running it in a dell server so it fails. I tried the cli utility but also failed, I found this blog...

From it's specifications it looks like the dual qsfp connectx-3 has 3W qsfp support including LR4. From the firmware release notes 40gb support: QSFP-40G-SR-BD MC2210511-LR4 Some internet posts of ethtool run on this show supported link types of 40000baseLR4/Full. 56 GbE over a ConnectX-3 VPI...

Seems like common sense but after hours of frustration with a 9361-8i card (legitimate card, I got it from eBay but it came with a proper retail box), I got it to work with two of my SAS SSDs for Cache Cade. The card has a 8GB CV module, and Cache Cade key. Following Murphy's Law, I decided to...

Hello! I have the opportunity to purchase some used dual-port Mellanox MCX354A-QCBT ConnectX-3 cards with VPI network adapter. (10 GbE Ethernet and 40 Gbps InfiniBand.) These would be perfect for my cluster after correct configuration.. They were originally pulled from EMC systems and...

Finally found someone willing to test the method I came up with, and it works great (nearly the same process as the LB6M flash, with some differences due to a larger bootloader from dell etc) Unlike the LB6M > Brocade flash where there were some slight hardware differences that caused things...

Hi all, Just got a 480GB Samsung SM953 NVMe SSD, which I wanted to check the firmware version of, and configure over provisioning etc. Oddly, when I use either the consumer or datacenter versions of Samsung magician, it cannot find the drive. Has anyone else ever used one of these, and been...

Hi, I have four MCX341A-XCAN (Connectx-3 EN, one SFP+ port, OCP mezzanine format) on Quanta Windmill nodes, and I want to update the firmware. The current version is 2.10.3782, but the last upgradable version officially available on Mellanox site is the 2.31.1598. And i'm pretty sure there is...

EDIT 1 : post #3, ESXI is not the culprit here. Launching anything bare metal do exactly the same. Hi, I'm finally updating my homelab network to 10GB, and I have some issues with my ConnectX-2 cards. The server is an R710, with ESXI 6.5 u1. I want to passtrough the card to a Windows Server...

Dear colleagues, I set up a ceph cluster for the lab and therefore was looking for payable 10G switches. So I slipped over the G8124 as you can get those for a good price. The switches basically do what they should. Nevertheless the firmware installed does not support vLAG, which I want to use...

Hi. I bricked my IBM m5110 while updating bios via Windows MegaRAID Storage manager. I have such message: "F/W is in Fault State - MFI Register State 0xF0010002 Adapter at Baseport is not responding No MegaRAID Adapter Installed" I' tested: 1. LSI recovery firmware from LSI Preboot CD - it...

(Crossposted to FreeNAS forums) I have a server with an LSI 9211-IT HBA, Intel 910 SSD, and Chelsio NIC. I was updating the HBA firmware. As usual I checked no other RAID/HBA/LSI cards in the machine, so I flashed the HBA. It now turns out that the Intel 910 uses the same chip internally -...

Purpose: A proper MODERN tutorial on updating the firmware on the IBM M1015 on a UEFI system, in my case my IBM M1015's were already crossflashed to LSI 8211-8i long ago with the older P16 firmware which I wanted to update to the latest firmware. It is the same process either way. This tutorial...

Hi everyone, new to the forum and just got an M5110 board with serveraid firmware, read many articles but didn't find answers unfortunatly. The main point is.. How to update firmware in a system that is not an IBM server? While trying to update it, there is a control of the system in which the...