Hello everyone,
can you please provide me with pointers towards any firmware for Intel DPMMs.
I'm on the quest to recover a bricked Apache pass ES stick.
Its version is reported as all zeros and it's unmanageable as well as reported non functioning.
Of course i had a look at the HPE support...
Hehey Folks
Ok i come directly to my situation.
What's the HW:
Mainboard: Supermicro H12SSL-CT ( REV: 1.01 )
CPU: AMD EPYC 7232P
RAM: 2x Samsung 8G 2Rx8 PC4-2133P-RE0-10-MB1 ( M393A1G43DB0-CPB2Q S )
If i put all power cables on ( both cpu and the big 24 pin) the POST stops at:
DXE--USB...
Hello, I have 2 HGST HUS724040ALS640 drives and I want to flash them with the A280 firmware. I bought them from an online seller and I don't know where they came from. Currently both of them are reporting to be Hitachi DKW2E-H4R0SS.
I'm a noob in hdd firmware flashing, never did it before, so I...
update: only size incorrect issue remain
for some reason wrong size is shown for the drive 880GB instead of 960GB
i am running with ubunu 20.04 live cd.
i successfully formatted and erased using hdparm
i tired format with Samsung DC toolkit but it fails:
here is some reports\logs...
My Freenas server is not detecting my new (from ebay) SFP+ card. It is the Mellanox ConnectX3 MCX341A-XCE, but I haven't been able to find an updated firmware for it anywhere. If I try the other firmware's for other variations of the card, I get this error -E- PSID mismatch. The PSID on flash...
I've been racking my brain on this all day. I followed the steps in this thread and got stuck on step 14. I get this output:
fs0:\> sas2flash.efi -c 0 -list
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved...
Hello, I recently purchased this card on ebay. I installed the card into my supermicro server and put in 7 of my new sas drives. I can see all the drives, but when I go to create a new volume, my only options are Raid 0,1,00,10. The firmware is fully up to date from the broadcom site. I...
I have been trying to get my P812 working in a non-hp system for over 30 hours now (unfortunately split up due to only being able to do things on the weekend :/ )
It is a used p812 but I have verified that it works by putting it in an old (DL360 G5) server and connecting it to my msa 60...
Hi,
I've been googling this question for a few hours now...and just can't seem to find a straightforward answer. I have several IBM branded drives... I believe they're all Seagates...
ST3000NM0033 - SATA
ST4000NM0033 x 2 - SATA
ST6000NM0014 - SAS
All running on a Supermicro server.
Does...
Hi All,
I'm looking for some advice, I've been task with getting an IBM Blade Center's fan working this has led me down a path which I am hoping I can get some advice on.
Issue we have a fan that failed at our LIVE site on an Blade Center H we replaced the fan with a new one but it reported...
Good evening all. I picked up an R720 last month with an iDRAC7 active Enterprise license and would like to update the iDRAC firmware. The current firmware version is: 1.57.57 (Build 04), last updated Oct 2 09:17:51 2014
I see the latest version is: iDRAC with Lifecycle Controller v. 2.63.60.62...
Hi All,
I have just go a bunch of these HP HSCP1920S5xnNMRI 1.92TB SSD (HGST HUSMR1619ASS204) drives and I guess they are 3PAR ones (with default P100 Firmware written on label). Just wondering any one could supply a latest firmware for these drives? Seems couldn't find anything on the...
I have a HPE-rebranded Seagate XF1440 NVMe drive with model number VK001920KWDUH. Its preinstalled firmware is HPK2. I can find HPK4 on HPE site, but they only provide a Linux-based updater for this version.
I don't want to burn a Linux Live CD for doing this, so I tried to extract and replace...
They came from a dell server/equal logic and I'm struggling to get Storage Spaces Direct working so my last ditch effort is to update the firmware.
I downloaded the dell utility but I'm not running it in a dell server so it fails. I tried the cli utility but also failed, I found this blog...
From it's specifications it looks like the dual qsfp connectx-3 has 3W qsfp support including LR4. From the firmware release notes 40gb support:
QSFP-40G-SR-BD
MC2210511-LR4
Some internet posts of ethtool run on this show supported link types of 40000baseLR4/Full. 56 GbE over a ConnectX-3 VPI...
Seems like common sense but after hours of frustration with a 9361-8i card (legitimate card, I got it from eBay but it came with a proper retail box), I got it to work with two of my SAS SSDs for Cache Cade.
The card has a 8GB CV module, and Cache Cade key. Following Murphy's Law, I decided to...
Hello!
I have the opportunity to purchase some used dual-port Mellanox MCX354A-QCBT ConnectX-3 cards with VPI network adapter. (10 GbE Ethernet and 40 Gbps InfiniBand.) These would be perfect for my cluster after correct configuration..
They were originally pulled from EMC systems and...
Finally found someone willing to test the method I came up with, and it works great (nearly the same process as the LB6M flash, with some differences due to a larger bootloader from dell etc)
Unlike the LB6M > Brocade flash where there were some slight hardware differences that caused things...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.