cisco

  1. K

    [FS] 4-Node OpenStack Cluster + Cisco & NSa 3700 – $2,850

    Selling 4-node OpenStack cluster with full networking & management gear — ideal for private cloud, virtualization, or enterprise lab. Infrastructure: X8STi, Xeon E5506, 24GB RAM, 14TB Controller: X8DTL, 2× Xeon E5630, 96GB RAM, 14TB Hypervisors: X11SPi-TF (128GB, 101TB) X8DTU (2× E5630, 192GB...
  2. I

    C9200L - Can´t reset to factory default.

    Hey all I work at an ITAD company, we´ve received a C9200L that we´re getting ready for resale. There was 7 units coming from the same place, the 6 of them was force reset with no issues. But the last unit keeps returning to the initial users account. We´ve tried bypassing and reinstalling the...
  3. K

    PCIE to U.2 SFF card compatibility with Cisco C220 M4

    Good Morning I have a few Cisco C220 M4 8-Bay servers that I am trying to get a U.2 NVME drives working on. I have been able to update the BIOS, but have had no luck with getting a 10GTek SFF 8643 PCIe card to be recognized by the machine. I am using the Rev A riser and have tried both slots...
  4. P

    Cisco FET-10G for $0.93

    $0.93 per piece if you order 4 or more Cisco FET-10G SFP 10 Gbps Transceiver Module | eBay
  5. K

    Can Cisco N9K-C93180YC-FX be used as router ?

    Hello, I watch these switches since their price on eBay was about $15000 but now they are way more cheaper and you could buy one for about $1000 or less. Regarding this and what I have read in these switches datasheet I started wondering if they can be used as routers as well...
  6. D

    Help with SFP+ to XFP on Cisco SPA-1X-10G-L-V2

    Hi, I need some help on an older Cisco ASR-1001, NOT the X or what not, the plain ASR1001 router with the SPA board and the XSP module in it to connect to a SFP+ 10G module. I got the fiber modules form FS (XFP-10GLR-31) and the site clearly say it isa multirate type and compatible with either...
  7. sparx

    EU [FS/FT] Cisco C3560CX-8XPD-S

    I have a switch for sale or trade. Cisco C3560CX-8XPD-S. As far as I remember it came with IP-Base. 600€
  8. X

    CISCO SG250-26P Noctua Fan replacement problems - Fans spin up, then stop after a few seconds

    Hey there dear STH-Community, a few months ago I was on the look out for a 19" rack mountable manage switch with PoE+ and came across a dirt cheap CISCO SG250-26P which I scored for 100€. It was (and still is) in perfect condition, but upon powering it up, what I've not taken into consideration...
  9. M

    cisco 1850,2800,3800 domain B (US) on E (Europe)

    It seems these APs in B domain is considerably cheaper than E domain, even including shipping costs and customs tax. I am trying to understand the difference (only indoor use), in terms of legal use of RF bands. Looking at wikipedia : For 2.4 Ghz: B (north america) does not allow channels 12...
  10. Z

    FS: Sonicwall TZ600

    For Sale used TZ600 $150+shipping (US only)
  11. Z

    FS: SOLD

    ALL SOLD
  12. Z

    FS: $299 Sonicwall TZ400 and TZ350 + BONUS TZ215 (Jul 1 2022 lics)

    Selling a TZ400 and TZ350 that we replaced with Meraki MXs. Both the TZ400 and TZ350 have lics till Jul 1 2022 . The TZ350 is under warranty till Mar 5 2022 . TZ215 is added as a bonus (no support or lics) All come with power supplies as well. FS: $750 $299 + shipping + BONUS TZ215
  13. R

    Brocade ICX 6450-24 vs Cisco Catalyst 2960G-24TC-L

    Hi, If this is wrong forum to ask this I'm sorry. I can't decide which switch should I go with. I'm total newbie in terms of networking and I want to learn something new (on a homelab level). I don't have any special requirements, but I'm planning to use pfsense/opnsense on my R220 (I did not...
  14. bilbo1337

    Cisco storage server IPMI/node config options

    I have a question in regards to this cisco storage server. I only know mostly about Dell's servers and iDRAC. There's two server nodes on the cisco system, I'm assuming there's an option in cisco's "iDRAC" or IPMI to make the nodes redundant/failover or to treat it all as one server? I also have...
  15. nsummy

    [FS][US-IA] Cisco Nexus 7000 18-Slot Switch Chassis - N7K-C7018

    I have 2 of these available, and they come with everything required to run, along with a few switches, updated to the latest ios. Asking $600 each plus shipping QTY Component 2 Supervisor Modules - Supervisor 1(N7K-SUP1), with 8 GB memory cards 2 M1 I/O Modules - 48-port 1-Gigabit...
  16. I

    looking for 4x switch suggestion

    currently we have mix brand mode switches mostly cisco 3x2690G, 3132q (40GB), dell force10(10GB) we are out of 1G ports, and we in the process of ordering new(refurbished) switches we are thinking for ordering 4x3750x with 10GB module. (each cost around 300$ on ebay) I am thinking for going...
  17. Z

    FS: SOLD MIST AP41

    Open box MIST AP41. Got it from going to a IT conference and have no use for it as we are all CISCO. FS: $SOLD USA only
  18. G

    Cisco Catalyst Micro Switches

    @Patrick Unfortunately, I wasn't able to PM you directly. So here it goes. Just noticed this news from Cisco: https://blogs.cisco.com/networking/cisco-catalyst-micro-switches-good-things-come-in-small-packages Would be nice if you could make a vid about it if you have access to test them...
  19. Z

    WTB: Meraki hardware (MX)

    Looking for Meraki gear MX, 67, MX75, MX85 or 105 / 250 larger firewalls. (updated 12/20/22) Feel free to PM me. Thanks
  20. T

    Switch management access with colocation

    This might be a little outside the normal scope of this forum, but I figure people here might have some answers. So I will have two switches in a colocation cabinet (both Cisco SG350-52). One is for LAN connections, and one is to share colocation internet, which comes in over a single 1G...