Search results

  1. R

    Mellanox Switches - Tips & Tricks

    Hi, does SX6025 support ethernet or its IB only?
  2. R

    Xsigo IS24 F-X430083 or QLogic SilverStorm 9024-CU24-ST2-DDR

    Hi, Newbie to Infiniband. Had several MHGH28-XTC and CX4 cables from a deal , would like to try out Infiniband/VSAN in my home lab. Anyone familiar with those switches? Xsigo IS24 F-X430083 Expansion Switch QLogic SilverStorm 9024-CU24-ST2-DDR Which one will be better? Or they just work the...
  3. R

    Trouble with booting Intel S2600CP4 with Samsung RAM from HK

    I have the same issue (no useable memory)with this motherboard and now it even refused to post anymore after tried some different memory
  4. R

    OmniOS 151022 long term stable

    Hi, Tried the OI-hipster-minimal-20170502 with Napp-it. However, upon importing a zpool, it complaint about unable to do NFS share. Checked NFS service and it says NFS is invalid protocol. Is there any additional packages need to be installed for the minimal texted based installation of...
  5. R

    OmniOS 151022 long term stable

    Hi Gea, Just had a new installation of Omnios 15022. Followed the steps on the OS setup pdf to upgrade it from 15022 to CE edition 15022i, however, that seems to have a bit of problem as pkg complained that the new BE Omnios-1 can not be activated. Tried to manually activated it, but still...
  6. R

    Looking to get into Dual LGA 2011

    I would say, avoid Intel motherboards, they tend to have more problems, support less CPUs (not supporting OEM, ES, QS cpus).
  7. R

    Intel Xeon E5-2680v2

    Good price. But I'll hold and moving to v3 system now.
  8. R

    Does HP ATTO H30F 16-Port 511799-001 equivalent to LSI SAS 9201-16i?

    Yes you are rigjt. It could be the forst generation card, with 2.2TB problem. While the 9201 is 2nd generation 6Gb
  9. R

    24x 2.5 600GB sas drives in 5.25 bays CMStormTrooper

    I found some cheap HP D2700 chassis for $250 around locally
  10. R

    24x 2.5 600GB sas drives in 5.25 bays CMStormTrooper

    how would you connect the HBA to those SAS drivers sit in the bays?
  11. R

    Does HP ATTO H30F 16-Port 511799-001 equivalent to LSI SAS 9201-16i?

    Hi there, Has any one had experience with this card? HP ATTO H30F 16-Port 511799-001 ExpressSAS Internal SAS SATA II Control Card HP ATTO H30F 16-Port 511799-001 ExpressSAS Internal SAS SATA II Control Card Is it equivalent to LSI SAS 9201-16i? If it does, might need to cross flash to LSI SAS...
  12. R

    SAS2 expanders $60 (IBM, LSI chip, Intel alternative)

    Is there any reason to favor this one instead of the cheaper famous 36 Port 6G 'HP SAS Expander'? Compatibility reason?
  13. R

    LSI Sas 9201-16e

    I wonder this should compatible with the 'HP SAS Expander' ? Through in one of this card, one expander and one Norco 4220/4224, I'm should be good to go for my first JBOD DAS?
  14. R

    LSI RAID Controller and HBA Complete Listing Plus OEM Models

    Would the Intel RMS25CB080 able to be flashed into it mode? Just been lazy don't want to change the cable and attach another hba
  15. R

    S2600CP doesn't go on with post, hang at code B7h 'DXE Configuration Reset'

    this is for optimo performance You can have just one module installed, it's just slow the system down due to remote access the ram
  16. R

    S2600CP doesn't go on with post, hang at code B7h 'DXE Configuration Reset'

    No, I don't have the RMM module. The board does have BMC, I can access the bmc lan http login page, however I haven't configured a password for the anonymous user yet, does it have a default password? user id anonymous privilege Administrator user status enabled password, not configured with...
  17. R

    S2600CP doesn't go on with post, hang at code B7h 'DXE Configuration Reset'

    nothing attached, only two processors, one ram module, several fans at the moment, that's all. kind of minimum system.
  18. R

    S2600CP doesn't go on with post, hang at code B7h 'DXE Configuration Reset'

    Used to have a raid controller plug in, but now it has been removed
  19. R

    S2600CP doesn't go on with post, hang at code B7h 'DXE Configuration Reset'

    Thanks. Yep it does have emergency recovery, hope it will work, will try sometime later. It shows the first booting up screen but can not pass it. Have submitted a support request to Intel, let's see what they say about this problem. Maybe they have better idea on this.