Search results

Matlab can be CPU instensive indeed, but for most of the time, it is single threaded. You have to work on your code to make it multi threaded (for e.g. with parfor cycles). If you have a multi threaded code, it can take advantage of the extra resources and you can perform crazy computations. But...

The closest I got was this catalog (page 74):http://www.sunon.com/index2/uFiles/file/03_products/08-catalog download/Sunon DC Brushless Fan & Blower_(240-A).pdf I think this is a low static pressure part. (Around 0.3 inch-H2O) On the fan it is stated that the min cfm is 127. Its Dell part number...

Correct me, If I'm wrong, but I think this is a good deal, the seller accepted 8$s/Fan (now I think it can be less) for four items, and even changed the propietary Dell connector to 4Pin PWM. So far I'm satisfied, as even though these fans move a lot of air are really quiet. SUNON...

Is it always the same drive?

I know, I might have just used the wrong word... That is exactly what I think.

The same here. I have written both in mail and on Ebay to them, they said the same. I'm a bit nervous, I don’t think this process should take that much time. It like they are sitting on our money and might even use it.

Bought 4. Thanks for sharing.

I'm also looking for an adapter, mostly on Ebay, and there are a lot of options, but not sure how reliable they are. There are many cheap chinese ones, but on these I guess the supply voltage is simply "generated" with resitances (I don't really know, I'm not an electrical engineer.) These two...

Thank you guys!

Greetings! I'm thinking of buying 1 or 2 HBA/Raid cards and my choice will be one of the LSI 9211-8i variants. Most likely I'll be using it for Raid 1/10. There are many cards from different vendors (Perc H200, H310, Fujitsu D2607 rev A11, A21, IBM M1015) and I don't know which might be the...

According to this discussion, it can only boost to x28. Rampage V Extreme - E5 2696 V3 (18/36)

Apparently getting higher turbo is only possible with the microcode hack.

Hi! I am not sure about this, but the Taichi seems to be the only one supporting v4 Xeons out of the box, as it was released around the Broadwell-E launch. In addition to that, if you look at the bioses for the Extreme 4: ASRock > X99 Extreme4 it is specifically stated, which bios supports the...

I don't know, but probably I'd choose the safer way. If I am right, QFQG has slightly higher multis (it has to be confirmed by someone, who actualy owns one, as from the HW-Info screenshoots only the max is obvious, so no all core is known), so it is no wonder if its performance is also higher.

Well, its strange, considering the fact that the cpu-z version appears to be the same. But there is one thing I was thinking about. What if the cpu version is not the same? If you look at the HW-Info screenshot, three different spec codes are listed, QFQG, QG7R and QG** something. There are...

Mine are QGG6, if I remeber correctly. I have them since 5 months, so far everything is OK, I haven't experienced anything strange with Win 8.1. But I am not an expert, so I dont know anything about other steppings.

I have two, QS or preQS QG** ones. What are you interested in ? The description at cpuworld is accurate btw. (There is a comment with the turbo bins, single core x31)

I have 2 E5 2673 v3 in a Supermicro X10DAX with 4 8GB DIMMs and 6 HDDs. I'm only using an ASUS GT 730 VGA. The system is powered with a Corsair HX 750i which reports max 310 and 280 as average under load. Maybe under small FFT it can be more, around 400W I guess. BTW, the spec is QGG6, I've been...

Have you get them so far? I am interested if they are compatible with the board you mentioned.

I don't know if you have seen this page before and I either don't know if it is correct, but here are the turbo bins for the final Broadwell-EP lineup: Detailed Specifications of the Intel Xeon E5-2600v4 "Broadwell-EP" Processors | Microway Considering this I don't think it is possible, but who...