Hi
I plan to put a setup of 4 sas u2 in a m.itx chassis and i got a selection of 3 unit:
Kioxia CD6 (gen4) or Samsung PM1733 (gen4) or Samsung PM983 (gen3)
As gen4 nvme do have higher sustained write speed, i hope i will be able to get a proper 3gbps of write or even saturate the gen3...
Hi
I do wonder about the different compatibility and usage of different genration of hba. So first, if a Micron 9300 u2 or a consumer normal m.2 drive in an hba that support only sas 12g vs nvme.. any data corruption or decreased life ?
And while the microchip HBA1100 do run at sas and sata...
Hi
I want to know if we can get the highest sustained sequential write, by using an nvme Gen4 into a gen3 slot. On the transfert and ref, with a samsung gen3 970, after 20sec of 3gbps it drop to 1.5gpbs for the rest of time(after 2,4,9min). So no dram effect and we see an usb10g give about the...
Hi
So while i did read the article about the e810 100g nic into windows11.. I got quite issues on what config or proper setting to be set for an intel xxv710 25g card ? From a network running at 25, i just plug over on the 'remote pc' having win10 21h1 and i can only get about 8.5g on iperf3...
Hi i'm looking if there is any multifunction card with raid sas ... but with a network port on it as well ! Like for an hp proliant with only 1 pci slot and with the onboard raid b120 giving 2x sata 6 and 2x sata3 .. not the best on speed. In order to have a proper nas system.. So if any...
Hi
I would like to know / confirm the compatibility of the 50Gbe nic card with qsfp28 optical cable. I haven't seen 50gb cable, but only 100gb to 4x 25g cable. So if plug over a 50g card (MCX4131A a Connectx-4 Lx or CX4431A an ocp one. or mcx4431a ) is the cable will give you 2x 25g working...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.