Search results

Struggling with this problem for about a year but never had time to dig into it... Dell R730, 2 x E5-2680 v4, 64GB RAM, SSD Enterprise Storage, VEEAM Backup & Replication I have a VM with WS 2019 that it liked to boot in ~ 40 minutes 1 year ago and now it takes ~ 2 hours to boot. There are 2...

Windows Server 2019 2 x SSD M.2 NVME with 2 x PCIe Adaptor ( Storage Spaces Mirror) Yesterday I noticed that one of the SSD's is not detected even after restarting the server. I moved the problematic SSD to a PC and it showed up with not problems, the SMART is ok and with Data on it from 2...

Hi, X10SLM+-LN4F with latest BIOS/BMC updates starts for a brief moment and then stops. If I add a dedicated GPU the board starts and I have signal on the onboard VGA port. The iKVM/HTML5 works when dedicated GPU is installed. The VGA jumper is set to ON. Tried different Intel i3/E3 v3 and RAM...

Hi there, I have a strange problem with RAID on a Supermicro X10DRL-i that has 2 x S4510 in RAID1 and 2 x WD RED in RAID1. Sometimes after 1-2 weeks one disk/ssd is thrown out of the RAID randomly, SMART reports show no read/write errors or bad sectors. The board has 4 x S-SATA and 6 x I-SATA...

Hi there, looking for 2 x E5-2450 v2 at a good price. :)

I have 2 x SSD Samsung 850 evo 250GB in RAID1, the raid is on a supermicro X10DRL-i (Intel RST) with Windows Server 2012 R2. I want to clone the 2 x 850 evo to 2 x S4510 240GB that I want to buy. What is the best way to do this? Clone (acronis, clonezilla etc), replace one of the 850 evo with...

Hi there, never had problems buying from ebay but there is always a start, please be careful when buying from user "kevin920406b" Bought 5 cables SFF-8087 from here and they are not new or even new other, they are old mixed cables as you can see in my picture bellow.

Hi there, I have a DL160e G8 with 2 x E5-2450L running WS 2016 with Hyper-V role and all drivers/firmware up to date, now I have 3 vm`s, pfsense , nextcloud and a WS 2016 with VPN role The problem I have is with the WS 2016 VPN that is set up with L2TP and all works well besides the speed...

Hi there, looking for an e5-2609 v3 at a good price.

Hi there, I am looking for a remote backup solution (windows to windows) and I came across "Syncrify" is someone using it? I need it for ~10 clients with 100GB each.

Hi there, I have 2 x Intel S3520 480GB in raid 1 on a M5016 raid card with Write Through, No Read Ahead, Disk Cache Enabled and after 4 months the write is still the same but the read slowed down. I have tried every setting that I could think of... I even formatted the drives again and still no...

Hi there, looking for a good bargain for 2 x X5675

I have some servers with 4 x LACP with 1Gb NICs and some servers with 10Gb NICs no LACP. The servers with 4 x LACP over 1Gb work well and I can transfer data at the speed of 4Gb/s between them. When a server with 10Gb NIC makes a transfer with a server over 4 x LACP 1Gb it only works at 1Gb/s...

Hi there, I have a DL180 G6 with 25 x SFF with HGST 1TB and I don't have problems with high speed fans ~50%. My new DL380 G7 doesent like HGST 1TB 7.2k and fans go up to 78%, I managed to see that the problem comes from sensor temp 29 marked as storage that reads 51-52C with fans at 78% and has...

I recently bought a HP SE326M1 that is almost the same with the DL180 G6, the only difference I noticed is that it comes standard with ILO2 and dual fan redundancy. I needed to buy another power supply for redundancy and 25 2.5" caddy`s I want to share my experience with other people because...