Search results

8124M for $150 https://www.ebay.com/itm/133981609720

Got 2, thanks! They also have 8124M @$150 https://www.ebay.com/itm/133981609720

I personally don't mind if it's going for around what OP posted was the winning bid.

I'm having this issue again.

https://store.supermicro.com/supermicro-55cm-minisas-hd-sff-8643-to-u-2-pcie-sff-8639-with-power-cable-cbl-sast-0957.html

I believe the supermicro store has some

You can try and see if MFT does what you need. I believe they have an SDK too. https://docs.mellanox.com/display/MFTv4144

It’s an ok pricing if you need them I suppose but iirc someone posted the same item here last year for ~90

Happened to me on the forum, while browsing on an ipad. I’m including the link to help troubleshoot this problem...

Judging by the response, I'm sure you already know that mikrotik's aren't picky, but I'll just add that I'm currently using the FTLX8572D3BCL-G1 in the RB4011 and the CRS309 with no issues at all. Even details like temperature, voltage and tx/rx power are shown

You could run the test and open task manager, which should show you which adapter is getting all the traffic

Just placing this here to help anyone who might run into the same issue: The switch gave itself an IP address from DHCP and assigned it to the uplink port, and effectively did not forward ARP messages, causing the issue. Running no ip address solved the issue

Thanks for the reply! Further testing and I think it's the connenection between the host and the switch that has the problem.

Is anyone using the 7150 with 10G optics and noticing packet drops / high latency? Ping statistics for 192.168.0.2: Packets: Sent = 93, Received = 58, Lost = 35 (37% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms It seems to be...

Security updates requires a subscription, but you can call Cisco TAC and they may provide updates firmware for you. For VPN, the base license has support for up to 250 VPN peers, but only 2 Premium VPN peers.

Attached more photos for the curious :D There's a pic of the adaptor too, hope it helps in your search!

The one I've got was a MCX342A. They've used a OCP to PCI-E converter, but it's not perfect. If your PCI-E slot has a capacitor right below it, this won't work.

Got 2 modules and they are working without a hitch!

Have you tried this fix? FAQ Entry | Online Support | Support - Super Micro Computer, Inc.

Currently using the CX312C on Windows 10, and it works fine.