Search results

Yep, the original stands are included

I'm downsizing my lab and have a bunch of things for sale. If you are local to the bay area and can pick up (North of potrero hill), I'm willing to negotiate all prices substantially! Brocade ICX 6450-24P - This is the PoE version - No rack mount ears - $150 4U Storage Server -...

Would anyone happen to know if there is a compatible pci-e riser?

I have the same rack and rails but the Norco RPC-270 case. It has a similar problem where when I first tried to rack the server it took me probably 20 minutes to force it in. Once I got it in it did work, but it was clearly bending the rails when you pulled the server out / pushed it back in...

Can confirm RSC-R2UT-2E8R works well with my X10SDV-4C-TLN2F-O. This seller Supermicro RSC-R2UT-2E8R 2U PCI-E to PCI-E x8 Riser Card | eBay accepted my best offer at $25

From the linked doc: So while certainly not ideal, it doesn't sound like it's a security vulnerability with unknown repercussions - rather if it affects you, you will know because your server won't turn back on.

One thing I dislike about supermicro is they really aren't shy about using non-standards parts. I suspect what you are looking at may be something similar to the connector described here: PSU for server motherboard

Yes, that is the correct pinout. For a good comparison between similar connectors, I think this has a pretty good description of each: All about the various PC power supply cables and connectors. I've taken apart a number of PSU's - and what I've seen is that PSU's with multiple 12V rails...

4 more relisted: @$74.99 OBO LSI 9340-8i IBM 46C9115 M1215 12GB RAID0.1.10.8 PORTS controller

Ordered the bend insensitive fiber! Because I was curious I ended up running my existing fiber anyway to see how it would do. It's currently working just fine, I tested it vs. straight fiber between the same servers and `iperf` consistently was the same for each cable - but some of the bends...

I'm looking to run fiber from one end of my apartment into my server closet. Currently I've got cat 6 cable run and hidden as well as possible since I can't put it inside the walls and I'm hoping to run the fiber alongside the existing cable. My question, is will the bend radius around the door...

It's a small m-itx board that already has a dual port 10gbe nic in it's only pcie slot. For what used 4 port 10GbE nics are going for on ebay, I'd just buy a 24x10GbE switch - and still come out ahead. (I suspect they're too uncommon to have fallen in price proportionally to the rest of the...

Here's where I think this could be useful: I've got a zfs storage server, 2 proxmox nodes, pfsense firewall, and a desktop that I would love to be all be on 10GbE. 4-port 10GbE switches are now reasonable in price but in this setup which node would you keep on 1 GbE? I'm not aware of any 10GbE...