What good temperature cpu without a fan?
I have a new mainboard in a supermicro case (mini itx case not rack) and I have a temperature 10 ° higher than an other mainboard in consumer case.
I would like to understand what operating temperature it should work or add other fan inside the...
I need to urgently upgrade ram but is more difficult find this type, mainboar is old.
from site:
System Memory
Memory Capacity
4x 204-pin DDR3 SO-DIMM socket
Supports up to 64GB DDR3 ECC Un-Buffered memory
Memory Type
1600/1333MHz ECC DDR3 SDRAM, 204-pin gold-plated DIMMs
DIMM...
i have raid card inside on supermicro SC721TQ-250B Mini-tower, on backplane i connect 4 sata drive with controller cable.
on linux with megacli i try to blink respective drive, but not work.
i need to connect other cable for this? i not find any documentation.
tnks.
in the Case Chenbro SR30169 i put a
- Controlle Raid: ServerRaid M5014
and i put a fan (40x40) over heat sink. (and i need to modify the case laterally with some hole for fan air)
I will still need the fan for controller inside Mini-tower SC721TQ-250B (and modify the case?)
none have the same...
i need tu update my case server for homelab.
now i have inside
- Case: Chenbro SR30169
- Mainboard: Supermicro A1SAi-2750F (Atom avoton)
- Controlle Raid: ServerRaid M5014
and i put a fan (40x40) over heat sink. (and i need to modify the case laterally)
I would like to update the case with...
i need to buy a supermicro Mini-tower SC721TQ-250B for a mini-itx board atom C2750 (superimicro).
now i use a chenbro sr30169 in similar board, which guarantees an air flow on the disks and passive cooler of board.
system are in my homelab in house
1) Are all disks sufficiently cooled in this...
I have to add new ram, but I can not find the one requested by the producer (and not even the model I already use "Hynix 8 GB ECC DDR3 SO-DIMM HMT41GA7BFR8A-PB" x2 module ) do you have any suggestions? can i mix ram?
tnks
yes i think the same, i have some i386 oldbox pfsense, and the new version not have support fot this hardware.
my opinion is that netgate try to change gradually pfsense to limit installation on all device to prefer their appliance....
not that opnsense does not do it, but for now the project it...
i need to realize a new firewal with some function (qos/shaping/failover) on an alix apu2c4 board.
now i use iptables only but only console managemetn is hard on complex situation....
pfsense vs opnsense? suggestion?
I have a problem with a fan connected directly in mainboard supermicro A1SAi-2750F.
First test i use the generic case fan 4pin (no data spech) the fan speed oscillation up and down
and mainboard give alert.
i buy another fan NF F12 PWM same problem...
I fix temporary with a custom build cable...
I need a new NAS system.
now i use an old qnap TS210 as a nfs/smb share for data transfer and backup.
i have a custom proxmox server that backup on this qnap, now i need to share nfs storage on other machine
for using shared-storage for virtual machine.
i make some test and when i backup or...
i think to use two use proxmox VE on a DELL precision M4600 or two latitude e6230 (i5 3320M) as a good workstation laptop (one laptop as only a backup hardware solution) and expand lan with Expresscard if i need more lan
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.