Welp, I sent back the 6450 and my 6610 is lost in the seller‘s shipping department somewhere, so I guess I’m still shopping :p Looking at 7150s, I see that chassis fanless is only supported on the -24p and the -48p, so I guess that means that it is explicitly not supported on the -48pf, right...
Oops, now that I have the serial console connected again I see endless:
PoE Error: Device 0 failed to start on PoE module.
PoE Error: Device 1 failed to start on PoE module.
And then it hard resets slot 1, and back to the beginning :( I'll try a firmware reflash and return it if that doesn't help.
The plot thickens! I powered up the switch again today with an H510 plugged into a port, just out of curiosity to see what would happen, and... it worked! I had PoE working happily to both the H510 and R600:
So then I restarted the switch again out of curiosity, and sure enough back to no...
Hi folks, I'm the proud owner of a straight-from-ebay ICX6450 and R500, and I can't power one from the other. The R500 does power up from another PoE switch, but doesn't power up off any port on the 6450. This is a 6450-24P according to the labeling, and I've upgraded the PoE firmware as per...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.