Search results

  1. C

    ICX-6610 and 6com 6c-sfp-10g-t

    I saw somewhere, maybe here, that the newer subject SFP might clock at 2.5G. Nope. I found it interesting though, that it had two options, 10G-Full or 1G-full-master. I was trying unsuccessfully to get that SFP to negotiate 2.5G. I was successful running it at 1G and plugging it into a 2.5G...
  2. C

    SCSI II cable needed

    I need a cable, termed a SCSI II cable to attach to the connector in the picture. It has been called a SCSI II 36-PIN female/female but I've looked all over for it without luck. If you know either the cable or the name of the connectors, I'd appreciate hearing from you. The dimensions are 7mm...
  3. C

    DL380 Gen8 drive bay power connector voltages needed

    I have a DL380 LFF drive bay with 12 slots. It has an 8-pin power connector and I need the voltages for the pins, looking at the connector. My dl380 G7 drive bays use a 10 pin connector so I can't use it. Something like this, looking at the power connector on the drive bay. There are...
  4. C

    problem with SAS LTO tape and hard drive on same controller

    I am running a DELL R610, converted from a DL380 for power reasons. I have two HBAs. A Dell LSI that runs the Dell R610 internal SFF drives and an LSI quad port (4 mini SAS ports, 16 devices). two of the quad ports go to an external HP d2600 frame with 12 devices in it. One port goes to an...
  5. C

    inline ubuntu firewall

    I have a problem with my email server where I am getting hit by a bot out of Kiev (5.34.207.88) about once per second. In the 20yrs I've had this server I've not had an issue like this. Once blocked, they usually go away. My comcast business class cable router doesn't have an integrated...
  6. C

    ic6610 filter like a firewall?

    I have an ic6610 between my comcast business class router and my email server. All local traffic goes through the 6610. My att dsl router had a pretty decent firewall that allowed me to block addresses by range whereas this comcast box doesn't have anything I can find. I need to block traffic...
  7. C

    5Gb ethernet copper into 6610?

    Is there an low-cost way to get 5Gbps ethernet into a 6610? I also have a microtik crs305-1g-4s+in switches I'm not using if that can be employed. I have fiber everywhere so ideally, usb-c to 5Gbps adapter to fiber to 6610? For my other mac, I used a USB-C to 10Gbps adapter made by sonnet, a...
  8. C

    HP DL380 Gen7 debugging help needed

    Hi, I have the subject server running for about 6 months (ubuntu server 20.04) without issues. It started shutting down a few days ago after an hour. I get a red system health light but nothing else. I have CLI access to the ILM through ssh. I don't see anything in the records other than a...
  9. C

    Pointers needed to add CradlePoint as a backup

    Hello, If this isn't the right place to ask this, please let me know. In summary, I'm trying to figure out how to failover to a CradlePoint (lte4 cell modem) unit that I can't configure. I have an icx-6610 and thought I would use vlans. I have about 20 devices or so on a flat network...
  10. C

    Hang an lto tape off an HP D2600?

    I have a DL380 serving 30TB of disk, mostly family videos, pictures, music, and backups... owncloud sync for 10 devices, etc. Since adding 10Gb networking, I am more conscious of power so I picked-up a Dell R610 for $30 and want to test it against the DL380 but I am short one external SAS port...
Top Bottom