Search results

An hour or so.

I have tried 4 different types of RDIMM's (2133, 2400, 2666 and 3200). But the 3200 is SKHynix. These chips work fine with the 7742. I have tried 1 RDIMM in each of the 8 slots one after the other with attempted power-on for each. (Motherboard manual says for 1 DIMM, put it in slot C2) I have...

Can your Chinese CPU supplier suggest a mainboard that can be purchased that will work?

System log from BMC: ID: 18 October 25th 2021, 9:54:34 pm AMIF02F7496EBA0 spx_restservice: spx_restservice - - [4067 : 4067 CRITICAL][libipmi_AMIOEM.c:5987]Unable to get Current Active Image 1c1 - ID: 19 October 25th 2021, 9:54:34 pm AMIF02F7496EBA0 spx_restservice: spx_restservice - - [4067...

Since this is an endless loop, I didn't note the starting code. Here are some codes that come before the loop: 15 C2 C8 63 21 dE Ad A1 34 02 50 dE etc. etc. So it seems the last code of the cycle is 50: Memory initialization error and then it begins again with dE (whatever that means). I have...

These are the code meaning as per the manual: A1: Ide reset 34: CPU post-memory initialization 02: microcode 50: Memory initialization error dE: not listed Ad: Ready to Boot event

Q-codes for this board are in the Appendix of the manual: https://dlcdnets.asus.com/pub/ASUS/mb/SocketSP3(4094)/KRPA-U16/Manual/E18168_KRPA-U16_UM_V5_WEB.pdf

Here are the POST codes on the ASUS KRPA-U16. They go in a continuous cycle: A1 34 02 50 dE Ad A1 34 02 50 dE Ad ...

Thank you.

My ASUS KRPA-U16 motherboard is working fine with EPYC ROME 7742. I upgraded the BIOS to both ROME and MILAN latest versions using BMC web ui. Upon installing the EPYC 7D13 processor it does not POST. If I replace the CPU with the original 7742 is works again. It's hard to find any info on this...

Hi. Is this still available?