Search results

https://www.ebay.de/itm/134457791663 Not sure about how good is this one. Seller piospartslap has great reputation afaik (please correct me if I'm wrong). Don't forget to include code PIOFNJ2024 for 22% off (It should be added automatically, check just to be sure)/ There is additional voucher...

I won auction for 8 1.92tb PM863a drives. They were advertised as "at 70% health". I assumed that would be indicator of TBW. All of them are showing #5 Reallocated Sector Count non zero values. I assume that's all right for those drives as they are in the ballpark of 20-50 and #180 Unused...

I think it's great little platform with few options for expansion, two 2.5Gbe ports, 11th gen Intel i3 etc... https://www.seeedstudio.com/reServer-X86-i3-A1125-p-5050.html

Does anyone have a spare one? I would be very happy if I didn't have to pay half the price of the card itself. Thanks for looking.

Last week I got GPU power cable for my ml350 gen9. After installation, everything seemed fine I did some tests to see if cooling/power is sufficient. Everything went OK with two 500W PSUs. PSU config is in balanced mode (load is divided between two PSUs equally). I turned off machine and wanted...

Nice 4C/8T v5 xeon for smaller systems, like our favorite TX1320 M3 system. Now 9 pieces remaining. +15 eur off if order is over 150 eur https://www.ebay.de/itm/144948084973

TLDR: Purchased officially supported D-Link transceivers. They are not working/not detected in the D-Link switches. Detected properly in Brocade switch, but don't work either. So I wanted to do a little network rebuild at home as I need more ports + better wifi + opnsense. I decided to go with...

Looking for Switches: two gigabit managed switches (preferably identical models/series). Would be amazing if one of them would have PoE. 8 rj45 ports (max 10 -> looking for small factor box as it's not going into the rack) with one/two SFP/SFP+ cages. reasonable power consumption + 2 compatible...

Recently I acquired DL360 Gen10 and I'm trying to get lowest possible power consumption. I was able to get as low as ~42W idle in OS with 6 ram sticks + ssd in backplane + 1 PSU. Could go even lower if SSD would be connected directly to SATA port. Now I'm trying to disable iLO as it's consuming...

Not sure, how good/risky it is. I would love to have this board for that price, but seller is not responding to my messages, probably because I did write to him that I'm not from Germany (as every ebay-kleinanzeigen seller). But someone from Germany could try. As I understand, you can also pay...

Does someone has any 'official' info about this drive? Locally someone is selling bunch of these drives for around €125/drive at 1.92TB capacity (new, just tested). Seller specified in the ad, that these are made specifically for Netapp. It's NVMe with U.2 connector. The most similar drive I...

I would like to buy 2x8gb DDR3L ecc unbuffered memory for my R220. Thank you for every offer.

Possibly good deal on 1U supermicro CSE815-X10SLH-LN6TF server with six 10Gbps (three embedded x540 controllers) ports. https://www.ebay.com/itm/384709627783?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=s3uhbmpnskk&sssrc=2349624&ssuid=cw4i_2ont2k&var=&widget_ver=artemis&media=COPY

Unfortunately no caddies, but I think that's pretty good deal for 12gb/s shelf. https://www.ebay.de/itm/275149607103?hash=item401031d0bf:g:Sh4AAOSwylBh-T7o

I'm looking for things specified in the title: Xeon v4 with minimum 10 cores, max 120W TDP and not frequency optimized HP ML350/ML150 gen9 heatsink HP ML350/ML150 gen9 fan I have additional question, it looks like ml350 gen8 has same fan model. Both are Delta fans PFR0912XHE and that plastic...

I'm looking for CPU from xeon e3 v3 family with at least 8 threads (so 1230v3 or higher number). Thanks for looking!

Does anybody have any info on Deneva R Series SSD? Only info I found is that it has ~280 sequential writes/reads since it is only 3g and ~50k iops 4K (not sure if read or writes). I got this info from archived oczenterprise site, but I would like to know at least sector size and endurance at least.

For low budget small starting project I'm looking for identical multiple (6-10) SSDs. Budget is around 100€ total plus shipping. Every drive should have at least 120gb. Thank you for every offer.

I hope you all are doing great. Few days ago I made quite stupid purchase and did not read specs carefully. I purchased 12 pieces of Micron p400m 200gb SSDs quite cheap. It was pretty good deal and in a fear of missing out I made haste purchase. MTFDDAK400MAN-2S1AA is what I have and is locked...

https://www.ebay.de/itm/294429704866?hash=item448d60c2a2:g:7gwAAOSwwP9hVeKF