Search results

  1. T

    Dell W1GCR HN10N Broadcom 57810S unRAID & Windows 10 drivers?

    Hi neobenedict, I would like to know if you can create multiple VLAN in Windows 10 Operating System.
  2. T

    Is it possible to replace the "plugable" PSU in my SC818G case?

    Hi everyone, I got a 5017GR-TF 1U server. I find that the PSU fan is noisy. I would like to know if it is possible to replace the PSU and the power distribution board to a standard 1U PSU. I see there are Post about replacing redundant PSU but I cannot find information related to the SC818...
  3. T

    Supermicro X9/X10/X11 Fan Speed Control

    My X9SRG-F can use ipmitool raw 0x30 0x91 0x5A 0x3 0x10 0x7f ipmitool raw 0x30 0x91 0x5A 0x3 0x11 0x7f ipmitool raw 0x30 0x91 0x5A 0x3 0x12 0x7f To control the FAN 0x10 for FAN 1-4 0x11 for FANA FANB 0x12 for FANC FAND 0x7f can be smaller number (0-255) 255 = 0xff
  4. T

    10GbE NIC in PCIe 2.0 x1 (x16 slot), Will this cause problem?

    Thank for your reply, firworks. The speed is enough in my case. My network are using Mellanox ConnectX-2 (PCIe 2.0 x8), one in my PC (AMD B450 Platform, Chipset PCIe 2.0 x4) and another in my pfSense router (Intel H67 Platform, CPU PCIe 3.0 x16). MTU is 9000 in pfSense and 9014 in PC (Windows...
  5. T

    10GbE NIC in PCIe 2.0 x1 (x16 slot), Will this cause problem?

    Hi everyone, I want to upgrade my custom build TrueNAS to 10GbE. However, I find that the motherboard only remain a PCIe 2.0 x1 (in x16 slot). I accept the low bandwidth (5GT/s) but I would like to know if the card will fail to work in that slot. Any recommendations are welcome :) Thank you.
Top Bottom