Search results

I'm selling my workstation because I want to switch back to a docking + laptop. Specs: CPU: Intel Xeon W-1290P (10 Cores / 20 Threads) RAM: 2x32GB DDR4 2666Mhz Motherboard: Supermicro X12SCA-F + IPMI Storage: 1x960GB Samsung PM983; 1x 1920GB Samsung PM983 GPU: NVIDIA Quadro RTX 5000 Case...

Selling 4 of these servers. They've been running over a year now without any problems and still have support. - 2x Intel(R) Xeon(R) Platinum 8160 (24 Core per CPU, 48 Cores/96 Threads in total) - 128GB RAM (12x8GB) DDR4 2666 MHz - Smart HBA H240 Controller - HPE Ethernet 1Gb 4-port 331i Adapter...

2HE Supermicro Chassis with Dual PSU CPU: Intel Xeon W-2170B(14 Cores/28 Threads RAM: 256GB DDR4 ECC RAM Drives; 8 Bay Chassis, HDDs included: 1x 8 TB WD RED 1x 4TB WD Ultrastar 1x 1TB WD RED SSD 1x 6TB WD Ultrastar 1x Intel X520-DA2 2x10Gbps is included too. Asking for...

I have one spare HPE DL360 Gen10 8xSFF with Rails(New rail kit) 2x Intel Xeon Platinum 8160 (each 24 Core / 48 Thread) 128GB Memory HP Smart Array H240 8-Port 12G PCIe x8 SAS HBA Controller 2x 240GB Samsung Enterprise SATA SSDS iLO 5 Advanced Looking for 1700 Euros or you can suggest a price...

Hi, I'm selling my workstation: Intel Xeon W-1290P + Supermicro X12SCA-F + 2x32GB Non ECC Memory + QUADRO RTX 5000 Price: 1600 Euros, shipping worldwide. Located in Germany

CPU: Intel Xeon E-2236 6 Cores / 12 Threads ( 3 - 4.8GHz) Memory : 4x16GB DDR4 UDIMM ECC 2666MHz Storage: 2x1TB WD SN750 NVMe PSU: 2x 500W iLO Advanced iLO Enablement Kit is installed, (Dedicated iLO Port) HPE Hardware Maintenance Onsite Support is available until 22.02.2024 Asking...

I'm selling my workstation because I want to switch back to a docking + laptop. Specs: CPU: Intel Xeon W-1290P (10 Cores / 20 Threads) RAM: 2x32GB DDR4 2666Mhz Motherboard: Supermicro X12SCA-F + IPMI Storage: 1x960GB Samsung PM983; 1x 1920GB Samsung PM983 GPU: NVIDIA Quadro RTX 5000 Case...

I bought this evaluation unit Switch for 100 Euros on eBay back in June. It has SFP+ and QSFP Ports and runs on an Intel Atom. Does anyone have knowledge about this switch? It is supported by some open source network operating systems but these projects seem dead. Most of them are just a...

I'd like to build a lower end server with an Ampere Altra CPU. I don't need 80 cores. Any suggestions where to get a motherboard/barebone and CPU?

Im searching for someone to sell me this router asap. I'll need it in the next weeks. Looking for 300 - 400 Euros. It needs to be the AC version, not the DC one. I only buy a model that is not affected by nand brick/degredation. I will pay for pickup+shipping with UPS world wide.

My edge-core Switch that I got from eBay(New) has a problem with the serial port. I set the baud rate and everything else as exptected in the manual(115200) but it only shows me garbled/junk characters. I can see a linux booting from the way and the speed the characters are printed in the...

I'm searching for a cheap motherboard that supports running Xeon Gold cpus with the extra omni path connector. Single socket would be great. The seller that I got the cpus from told me that they only work in specific intel boards which are crazy expensive. Any recommendations?

Im building a 1U Server with a Xeon W-1290P. I've been told that is is possible to cool 10 cores on 4.7GHz with a Supermicro SNK-P0046P Passive cooler on 1U. Is that even possible? This CPU can draw up to 300 watts. Any advice would be great.

I've got a A10Networks Thunder TPS 4435 Appliance with 16 SFP+ Ports that are connected to one Broadcom network chip. In the original software, the interfaces are detected. But I've removed it from the disk so I can't check which driver it uses for the NIC. This is the lspci output: 0c:00.0...

I've got an older A10Networks Thunder Firewall from 2013. The included software is not usable for me because it is just too old. I'd like to use it for other networking stuff. Hardware CPU: 1x Intel Xeon E5-2680v2 Motherboard: Probably a customized A10Networks board with AMIBIOS Memory: 4x...

The following items are for sale. Please note: The shipping cost is not included. All items will be shipped from Germany. If you buy more than one item I'll give a discount. Supermicro 5037MC-H12TRF 1700 Euros 2x Samsung 32GB Registered ECC 2666MHz Memory 85 Euros each...

Got a new and sealed NVIDIA Quadro RTX 5000 16GB Card. Price is 1800 Euros but I'm open for price offers via DM

Brand new SSDs, 0 Power on Hours. 2 are available for 450 Euro/each. Normal prices starting from ~630 Euros. Shipping from Germany. Please contact me for shipping costs to your country

Selling this as new. Board has been tested. Price is 320 Euros including shipping. If you are interested please DM me

CPU: Intel Xeon E-2236 6c/12T Mainboard: Supermicro X11SCZ-F RAM: 4x 16GB Kingston ECC DDR4 UDIMM Module Storage: 1x 500GB WD Black NVMe TLC NAND Chassis: CSE-813MFTQC-350CB2 PSU: 350 Watt Platinum Rated Power Supply Ebay Link: SuperMicro Server | eBay