Bought a new house and i'm getting it wired up. In my previous place we had an attached garage so I ran all the wires there and that was just fine for all my equipment. In our new place I'd *like* to put it in our utility closet or, failing that, in an under-the-stairs closet or maybe in my...
The case is filled with 4 of these: iStarUSA BPN-DE350SS and I think i have 12 of the 20 bays in use. They are pretty noisy. The only thing i'd need compute for on the box these days would be for Plex and Emby (maybe some photo management stuff too). I do my docker/vm experimentation on other...
Yeah problem is... getting stuff across the border is a PITA right now... not sure what the duty on that would be (probably not too bad). Still doesn't address the noise issue but I should look at quieter fans... don't have a good option for a different room right now.
1270 doesn't have quicksync.... only the XXX5 (and I think XXX6) variants do AFAIK. If I can stick in the LGA1150 series I keep the motherboard (not to mentioned the ECC sticks)
My latest DIY is now several years old. Picked up a nice case off here with a few LSIs and was pretty happy while it was in my garage. I made one mistake and got a non-quicksync xeon-e3. It's been a good machine... did a bunch of docker experimentation (after a brief excursion with esxi). I'm...
I've got a server running an e3-1241v3 but I want to take advantage of the Plex hardware transcoding so I'd like to upgrade to a e3-???5 chip. Let me know if you've got one you're willing to sell.
Sticking with the xeon line since I'm running ZFS w/ECC.
I was advised to upgrade my HBA firmware to see if it helps with some expander flakiness I'm experiencing.
When I went to find newer versions (i'm using 19.0.0.0-it from the supermicro site... this is for an x10-sl7) my search redirected me to Broadcom(/Avago??) but all i can find there are...
Yeah I've seem Tam around for a bit and not heard anything bad so I'm comfortable on that front. I'm less comfortable on the other stuff :-)
Are you from the 'burgh or is PGH your monogram?
I'm in a somewhat similar situation except I'm looking to move my server from the tower it's currently hosted in to this kind of chassis. Things important to me:
I want to move my existing MB (X10-sl7) + e3-1245v3 + memory over.
The above board has 8 sata ports which, as I understand, can be...
Working under the assumption it would be better to install my hosting using UEFI, I started down this road of frustration (feel free to challenge that assumption as I was able to get it running under legacy BIOS just fine).
I've tried using both the CD I used for my initial (bios-based) install...
I'm leaning heavily against ZFS largely because I don't want to be "stuck" with needing to use all the same sized disks plus my workloads (home fileserver for storing media and desktop/laptop backups) don't really require the kind of "real time" raid support something like ZFS provides.
I'm...
My primary reason for going with JRiver was the size of my music library (about 50k tracks). JRiver is (or at least was) the only real option for dealing with such large libraries. The play doctor is also a fun touch. The DSP side of JRiver is compelling... i've heard a lot of folks praising...
Thanks TD
I had assumed it would assign different devices (e.g. /dev/sda, /dev/sdb, etc) . My (possibly faulty) recollection from windows is, if I plug a drive into a different port, it's a different device from it's perspective. Does linux 'sticky' a raw device to a particular drive id rather...
I guess I have a fundamental misunderstanding about expanders. I didn't realize you could chain them together. I thought after I used all 8 on-board SAS ports I would have to put a PCI card in to gain additional SFF-8644 ports and those would hook up to N (on the order of 16) additional drives...
I finally got off my butt and pulled the trigger. FWIW, our electricity (SF Bay Area) is about 50% higher than the national average. In the end I decided to go with the following:
e3-1241v3 (only a few bucks more than the 1231@The Egg)
x10-sl7
16GB (2x8 CT2KIT102472BD160B)
For the time being...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.