My Esteemed Colleagues,
I need your recommendation on a RAID 1 - USB 2.0 / eSATA / Firewire 2-drive enclosure, capable of 2 - 2T drives. I do NOT need NAS capabilities. I would like to add my own drives versus a retail unit with drives.
What I have been using is RAIDON GR3630-2S-SB2+ (USB...
FYI…The Tyan S5512WGM2NR does NOT support WOL (Wake-on-LAN).
This is a deal breaker for me.
I built a Norco 4220 around this motherboard and WHS v.1…software installed, started loading data, putting the final tweaks to it…when I encountered this.
While the board the supports S3...
My fellow S5512 users…
Okay. I plead Uncle (only because I can’t figure this out).
Does the Tyan S5512WGM2NR pass SMART data? If so how?
My configuration:
Norco 4220
Tyan S5512WGM2NR with firmware v.1.03 and with i3-2100T
2 - Hitachi 2.5” 7K500 drives running RAID 1 through the motherboard...
Tyan S5512WGM2NR: No m1015 WebBIOS? - SOLVED
As stated, Tyan S5512WGM2NR with the IBM m1015 card (new MB; fleabay card; I’ve got 4; tried all 4). When booting, I get into the LSI MegaRAID BIOS screen and press Ctrl-H for the WebBIOS. Quickly, a line appears “WebBIOS will be executed after...
Yea, a real noob question. But I’d like someone to explain why the IBM M1015 cards are being flashed to that. I don’t understand what IT-mode is (or isn’t).
Background:
I’m building slowly. Norco 4220, Tyan S5512WGM2NR. Going to run WHS v1 with duplication. The decision the...
I’m building…
Tyan S5512WGM2NR inside a Norco 4220. And I thought that I would test the drives with Hitachi’s Drive Fitness Test (DFT) before use (7K500-250 2.5†for the O.S.). I’m individually plugging them into a SATA port on the board and trying to run DFT. But DFT does not see...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.