fyi there's a new epyc cpu 9004 and supposedly a new gigabyte board coming out. it will have 4 full x16 slots and also several mcio things that i can't find any info about. but if i understand the mcio connectors can each hold 4 or 8 sata drives but the cables don't exist. anyone know anything...
Ha! It is indeed about 100W, crazy. I don't "need" the 10G ports, but I do have a couple of servers with 10G ports on it so I figured I might start upgrading. However, no other endpoint has 10G yet, so I never see transfer speeds above 1G yet. I agree with you and I think I will opt for the...
Hey everyone, great thread. I have one of these, and wanted your opinion on this...
one of these supermicro 6x10G computers vs one of those j4125 celeron protectili minipc's ?
I'm going to install ipfire (or pfsense, or openbsd) on them.
If the minipc is better or equal, I'll just go with that...
I am considering getting this. The sole reason is that it has 5 pcie slots that can be used at x16 speed, which is nearly impossible to find. just about every other mobo has slots where one is x16 if nothing else is plugged in, otherwise 2-3 x8 slots at best. this thing has 5 x16 ???? can...
Thanks yes. I think I'm giving up on this effort. Maybe I'll check out the linux way someday. Seems like a headache. Hopefully someone makes an addon card.
Doing more reading, this might be impossible:
Make a computer act as a virtual USB device for other equipments
And I've been googling for a while now, and I don't see any adapters or anything to do this.
Maybe the way to do this is on the box I make, use the ethernet port, and on the other...
I've been building these storage boxes for a while now, but what I really want to try next is a windows based NAS. Meaning, I use a regular motherboard, and all those regular parts, but somehow, I can connect it to another pc using a REGULAR usb cable (ideally usb3.2). And the NAS shows up...
Finally, I believe i now have the root cause of my problem, sheesh.
When I first got the 9202 card, which needs a x16 PCI slot....I put it in a x8 slot to flash. It flashed fine, no errors, but clearly only part of it was successfully flashed to IT mode. THen when I started using it, no...
Ok I have confirmed the problem: the 9202-16e is the issue. I put in a 9200-16e card and it seems to be working fine.
But still could be the card or at least in one case i know it needed a x16 pcie slot, when i had it on a x8....you know how these mobos when multiple pcie are occupied, the...
Another update....I don't understand this, maybe someone does.
The way I "fix" the disconnected disks is like this. I take the disk that isn't detected out of the case, and attach it to another computer using those external usb docks. Then I check it, and it's usually perfect. Then I put it...
OK I didn't try the linux ISO yet. But I removed the 16e card from the systems. It didn't work on the old supermicro-x10sat-xeon system (although I understand that because I don't have any x16 slots available if I use more than one pci slot), and on the other ThreadRipper server, sort of...
I have a 9202-16e, which has capacity for 16 disks, and technically shows up as two 9202-8 devices to computers. It's a windows machine, and I see that I have like 6 PCI and Unknown Device errors (yellow exclamation) in the Device Manager. And given that only one 9202 device shows up properly...
I have a server with two HBA's on it. supermicro old x10sat, running windows server 2019. On an Asrock motherboard.
I have a typical 9207-8i for 8 drives. It works perfectly.
I also have a 9206-16e, which is the problem. It has those 4 big cables coming off of it into a separate storage box...
OK what a disaster that was.
So I had given up on this server. Anyway, long story short....it is back alive! The HBA cards were successfully flashed.
If anyone is wondering what the problem was....the boot sector on the motherboard got corrupted in between one of those boots. It wouldn't...
well, it's still not good. I've been able to get into the uefi a few times, but now no more.
Something is definitely wrong, not sure what.
My new ram is here, I'll try it. But I feel it's not the ram.
then i re-seated the cpu and dusted the machine.
Now I get 4 beeps, which means "unrecognized...
OK! update....
The mobo usb header had fallen off, I plugged it back in and it worked. THen I was able to successfully run the commands above.
But upon reboot, same beeping issue. I think one of my ram sticks is bad.
But I think it worked!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.