Hey dudes, another motherboard saved X10SRH-CF that refused to post, saved with the sum utility.
Just wanted to come here and thank you.
I have a new respect for the resiliency of SM motherboards.
-JCL
Yes they did, and that was February of this year too! Surprised me.
I just had to pay for shipping.
Maybe they still had stock or something like that, I dunno.
-JCL
Whelp, stop your grinning and drop your linen, I fixed it!
I did the command-line process with sum under SuperDoctor 5 to update the BIOS while the machine was off using IPMI, and so help me it worked!!! Another motherboard saved!
After that, the machine posted and I was able to run the...
Actually, taking a look at what they are doing, it looks like they are essentially updates the BIOS from IPMI using the command line without powering up the machine at all, so in theory that might work. I will give it a try tonight.
Thanks
-JCL
There are several available on e-bay for around $200, might be able to argue them down, you can also find some that come in a chassis as well.
I just thought I would check with the community here before going that route.
-JCL
Yep, couple of times, and I talked with support and told them what was going on, and they said yeah you probably can't fix that yourself. I think it would have to stop "looping" for that process to have a chance to work, but it won't even POST at all.
Tried to RMA it, but they said it is too...
Yeah, when I apply power, it's two beeps, the lights blink, and the fans briefly spin. And it just keeps doing that in a loop.
iLO is still functional and it says it can set the recovery mode, but then it can't control power to the motherboard at all. So it never even tries to get into...
- limited to 4KByte chunk size (max 64TByte volume)
FWIW - I think NTFS has been able to go larger than 64TB for quite some time NTFS - Wikipedia , no?
- asynchonous (deduplication was a process that would start in the night/configured timeslot)
Of course, this is basically a free feature that...
The problem with this, and correct me if I am wrong, but MSM has the ability to send you e-mail notifications on array status so you know right away when a disk fails or is about to fail, or other issues.
So far I have not found that feature in LSA.
-JCL
Hello, I can get the software installed, but it still gives that yellow message that it can't find the server.
I have the license file in the right place. Anyone
OK, thank you, I will try that.
I got sick of the whole path thing and just edited the batch file to point to the correct folder.
-JCL
I must have run through this 20 times and I still can't get it to work, not on my server, not on a desktop that I also have a 9361-8i in. I even switched to the previous version and now that doesn't work either. I don't remember which version I had previously that did work.
I can install and...
Thank you very much for your reply, you bring up some good points.
Do you really need deduplication? When I tried IT IT was a pita and Limited the Array to 4kb chunks (max 64tb Volume)
Why was it a pita? Just for the reasons you state or something else? From my experience it is a transparent...
Hello,
I recently purchased six 22TB WD Red Pro drives, and I am thinking about how to set them up. They replace a power-hungry 12x4TB R6 array.
It's a typical Super Micro 16-slot server with a Megaraid 9361-8i, with supercap pack and all software features, OS is Server 2022 datacenter...
So I have an LSI 9361-8i with Cachecade pro 2.0.
I am building a R6 array with 6x WD RED PRO 22TB drives.
I have many 400GB enterprise SAS SSDs, write intensive 10 DWPD versions.
My backplane is only 6GB/sec, but I could put them on the controller directly.
Card is 1GB cache version, so max...
Well, in my case, I am replacing 8x 400Gig eSSDs in R10 that consume 10w each under load, and this new drive I think is around 16w under load, so for me it is a big reduction. I think the Samsung drive uses about 6-7w under load.
Sure, fair enough. If I am buying from a reputable vendor like...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.