Just got a 7150-C12P from ebay.
ICX7150-Boot>nand bad
Device 0 bad blocks:
05a00000
05b00000
ICX7150-Boot>nand info
Device 0: nand0, sector size 1024 KiB, Micron NAND 2GiB
Page size 4096 b
OOB size 224 b
Erase size 1048576 b
subpagesize 4096 b
options 0x...
Yeah sorry, I was wrong about that. In an ICX7250 (probably works for other 7xxx switches) I was able to see some very basic information about rev. 2 S+RJ10.
Now I'm using a rev. 2 S+RJ10 in an ICX6610 but it just shows "EMPTY" like yours.
I think the older revisions of S+RJ10 will appear this way in all ICX switches.
Revision 2 and newer S+RJ10 (you can identify by a /r2 at the end of the serial number) will show some basic info in the "show media" output.
This doesn't affect you if you're only using one PSU but maybe it will help someone else.
Of course you should use the REV. C if you are only using one. I just got my 6610 a few days ago and with two REV. B PSUs I can't believe how quiet it is. A lot of people have mentioned the noise so I was...
It's an L3 switch with 16x 10gbE ports and 2x 40gbE ports on top of the gigabit RJ45 ports. The '24P' and '48P' models support PoE+. Also runs fairly quiet and has a simple CLI.
I want to run breakout cables from a 6610's QSFP breakout ports directly to LC keystones like this in a patch panel.
I want to be able to connect typical LC-LC cables from these keystone jacks directly to network cards. Will that work if I use a Type B breakout cable? I was looking at this.
Your kits should include all of the parts shown in my second picture. What I'm saying is that this eBay auction doesn't include either pair of bracket extensions (#3 and #4 in the picture). Or at least that's what the seller told me.
The bracket extensions are what secures the switch to the...
Just a heads up, I messaged this seller about the 4-post rack kit because their pictures don't show all of the parts.
Maybe you can make it work, but I don't think these include the bracket extensions. It's a good deal regardless, but worth noting imo.
Also, I asked them what revision the PSUs...
I recently purchased an SC846B chassis and I'm trying to find out which rails are the best for this. It seems the best options are:
MCP-290-00053-0N (yellow labels)
MCP-290-00057-0N (blue labels)
MCP-290-00058-0N (yellow labels, only fits short-depth racks)
This is the clearest comparison I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.