Hello.
I am bought bl460c gen10 + m.2 kit (riser + interposer)
Some of the entries alarmed me in quick specs doc
So i have two questions,maybe i misunderstand something
- If i put m.2 ssd in server and sata SSD will be it work or not?
- If i put m.2 ssd for example 4Tb and 1Tbwill be it...
Hello!
Docs for HPE Virtual Connect FlexFabric-20/40 F8 Module says:
"Virtual Connect FlexFabric-20/40 F8 modules are supported on c7000 enclosures with the following SKUs: 5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21"
But what will happens if i put this modules in 4XXXXX-B21 chassis? Maybe somebody...
Maybe someone can help explaine me next thing:
If i have X3950 x6 with E7-8800 v2 CPU and DDR3 RAM compute books, can i upgrade E7-8800v2 CPUs to E7-8800v3 CPUs without upgrading compute books?
In docs they say next
Supported upgrades are:
E7 v2 processors to E7 v4 processors (new DDR4 DIMMs...
Hello. I can’t get the mezzanine card to work in the Dell M520 serve.
Mezzanine card p/n 073TM8. This is LPm16002B-D 16gb fiberchanel card. When i try to start server with this card i taking message "Unsupported mezzanine card istalled! System halted"
In dell m610 this card works fine.
Is there...
I watched russian webinar (HPE russia channel), speaker says that superdome 2 and superdome X chassis is same, but in superdome X they reworked XFM modules.
So i think it will be work
I know, its a vary strange question, but..)
It is possible to use Superdome 2 chassis (maybe with crossbar modules upgrade) with BL920s G8 or G9 blades?
It seems like they physically compatible at first look.
Yes, disk shelves not a problem, i have 3x42U racks in my lab) But licensing is a real trouble(
Maybe you tell me about newer models from mid-range segment? This is a very interest for me.
Hello!
I have a quiestion about netapp FAS filers
I want to buy from ebay Netapp FAS 6240, maybe 6280 (single unit, without HA), and i am worry about licensing. Can i use netapp buyed from hands? i readed about i must have a licensed to use it, it is a true? I need basic functional - iscsi, fc...
Hello!
I have a problem with Windows Server 2019 (and tryed 2016 too) and iSCSI target
I try to mount disk via iSCSI to blade server as boot disk, but when even one server has connected iSCSI interface starts to cyclical shutdown.
Hardware:
HP Dl380p Gen8 with QLE8152 as iSCSI target
HP C7000...
Thank You for reply!I am read that manual. But in VC all intuitive and all settings was correct. I was doubted because I did it for the first time.. Today i had solved this problem. Just updated bl460c bios firmware.. :D
Hello everyone!
I have been suffering for 4 days and nothing is working(
I have a HP C7000 chassis. In bay 1 located bl460c gen8 server with HP 534flb NIC onboard. In communication bay 1 installed HP Flex-10 Enet module. Also in rack - Quanta lb6m switch and HP dl380p gen8 with lot of LFF hard...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.