There was a discussion somewhere regarding the upcoming Kerberos signing changes with Microsoft and how this would affect omnios/napp-it somewhere but I cannot find it. Will AD authentication fail once this change is enforced by microsoft? What version of omni-os addresses this? Hoping to...
9361s OE LSI for the most part. I think I have one that was IBM branded and ironically that’s the only one that still works. I don’t care about speed so I would be totally happy to stick with old school 6gbps stuff but the VIB thing is the sticking point. Seems like I am just generating tons...
I have had nothing but problems with lsagroadcom 12gbps megaraid cards. Corrupt firmware (x3), heatsink mounting pins snapping and overheating, and inability to import foreign configs. All I am using them for is a simple raid1 120gb SSD boot array for esxi. I relied on the LSI VIB in the past...
will this impact normal SMB (ie NOT netlogon) shares hosted on solarish in a domain environment? Or is the concern that new solarish boxes will not be able to join the domain until they support RPC sealing?
I have been using ZFS for my network shares since 2013. I keep biannual snaps indefinitely and currently I have biannual snaps from 2014-current. At some point I migrated servers and forgot to send the oldest 2013 snap first. I just came across a copy of this 2013 ZFS filesystem on some old...
I have 64GB of RAM allocated to the omniOS VM, I read that more ram is preferred over a SLOG but maybe that is no longer the case. I do have sync disabled for my pools but i still get the slow speed on ZFS send. My target pool is empty and the sending pool is 50% full. I understand that my...
begin tests ..
Bennchmark filesystem: /pool01-hdd/_Pool_Benchmark
Read: filebench, Write: filebench_sequential, date: 06.18.2019
begin test 4 ..singlestreamwrite.f ..
begin test 4sync ..singlestreamwrite.f ..
set sync=disabled
begin test 7 randomread.f ..
begin test 8 randomrw.f ..
begin test 9...
I finally made the jump to 10GB on my nappit AIO boxes and thought I had followed all of the recommendations, but I am still getting gigabit speed ZFS sends using NC. The weird thing is iperf gives me 8.9 Gbits/sec throughput so I'm not sure if any of the tuneables will help me here. The pool...
Four outputs per card so a total of 20. Funny thing is that it posts fine with 5x rx570 8gb and each one of those has 5 outputs per card for a total of 25
My X9DRG-QF will boot fine with 4x Radeon Pro Duo (dual GPU card with 16gb PER GPU) but as soon as i add the 5th it wont post. I am not using any hypervisor, just booting straight to lubuntu. Above 4g decoding is enabled and i have tried all of the different MMIO base settings. Is this a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.