Yes. I have tried 2 Mellanox ConnectX-3 EN cards it two different manufacturer motherboards, same thing.
Windows assigns a generic IP. Even if I use a static for my network, still no connection. Windows shows the card operational but disconnected. Same with 4 different ConnectX-2 cards.
Same...
Having issues with a Connectx 3 EN single port that will not link. 10gb modules are Mellanox and work in my network switches.
Windows 10 client loads the drivers for the card and assigns a default IP.
Proved cables operational, PCI-e port operational by using a NIC card, 10gb modules...
Well, crap.
I'm going to try these and see what happens. I know all 16 4k IP cameras will be fine on the gigabit LAN but it's the principle of the thing.
I bought a mini ATX with two slots just for the fiber network I have.
Tried. Kept saying failed on all 4 cards.
Now wondering if it's that my PCI-e3 x4 slot somehow isn't compatible. But then why is the card seen and drivers loaded?
Computers, such fun.
I found a couple 10gb connectx-3 single ports on eBay for $28 each.
Bought 2. Hoping these will be...
Apologies about the delay as I had to go into work. Over time even though not getting paid due to shutdown.
Thanks for the snippet tool. Forgot about that. What other screen shots?
Yes sir. Did that.
I have those tabs.
Those options remain greyed out.
Has the IP: 169.254.44.65/16
However my network is 192.168.1. _ _ _
That's what I don't understand.
If I set a static I get: 169.254.44.65/16, 192.168.1.55/24
But still will not connect.
Gateway: 192.168.1.1
DNS: 192.168.1.1
Sir,
Thank you for your reply as this is driving me up the wall.
Unfortunately nothing worked. I downloaded the 5.50 driver.
I found the ETH that you mentioned, but it is already selected and greyed out so I cannot change it to auto.
When I redirect the driver it comes up with best driver...
Experiencing the same thing. 1-14-19
Will not connect to my network. Will not acquire an IP nor connect using a static.
Widows 10 V 1809 client
Mellanox driver: 5.50.14643.1
Connectx-2 MNPA19-XSR/XTR SP# 671798-001
FW: 2.9.1000 (Tried to update FW to 2.9.1200 but to no avail.)
Tried deleting...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.