well... finally got it boot (brought back to service) .... they did some manipulation with "jumpres" on the board with the same DIMMs.
But now I have problems with BMC :( (card is installed at MB connect + green link is on when WB is on)
Looks that manual has nothing about it.
with outside case -> didn't manage... MB Supports ATX2.0 PSU ... I have as an second PSU only ATX (with 1 connector) :( ... and it doesn't work with ATX (not 2.0)
I have also DDR4 ECC Registered DIMM (DDR4 | Synology Inc.) for test from Synology,
but I think it won't work because E-2300 doesn't support Reg.DIMM :(
Hi everyone,
I met with the following problem: I have a brand new asus p12r-e MB (with the latest bios) + 2x32Gb ksm32ed8/32hc (UDIMM ECC that is compatible with MB, DDR4-3200 CL22 ) + Xeon E-2300 CPU and met the error - > no memory (err 53).
2x32Gb memories are installed at DIMM_B2 and...
Hi.
I have X10SDV-F with my Supermicro Compact Mini-Tower case (that have 1 slot on the backside for PCI-E devices). I want to connect GPU via PCI-E that has 2 slots :(
Is there any way to connect GPU externally to the MB? (I just don't have space on my case for 2 slots GPU)
My be just to...
lucky you... i don't have such space for it inside the case (4 HDD)
Btw: what is the max operating temp for CPU? 80 Grad? my idle temp at the moment is about 50 Grad.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.